Part Image

SN65LVDS1DBVR - Texas Instruments

Description: SN65LVDS1DBVR, LVDS Transmitter LVTTL Driver, Receiver 630Mbit/s, 2.4 ??? 3.6 V, 5-Pin, SOT-23

Download SN65LVDS1DBVR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
SN65LVDS1DBVR - Texas Instruments PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - DBV (R-PDSO-G5)
click to zoom
3D Models
SN65LVDS1DBVR - Texas Instruments  - 3D model - SOT23 (5-Pin) - DBV (R-PDSO-G5)
click to zoom

SN65LVDS1DBVR Details

  • Manufacturer Part Number:

    SN65LVDS1DBVR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOT-23

  • Package Description:

    SOT-23, 5 PIN

  • Pin Count:

    5

  • Country Of Origin:

    Mainland China, Malaysia, Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.00002 A

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    LINE DRIVER

  • Interface Standard:

    EIA-644-A; TIA-644-A

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e4

  • Length:

    2.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    0.2 V

  • Output Characteristics:

    TOTEM-POLE

  • Output Low Current-Max:

    0.008 A

  • Output Polarity:

    TRUE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    3.6 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.45 mm

  • Supply Current-Max:

    7 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    2.4 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    2.4 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    TTL

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    3.1 ns

  • Width:

    1.6 mm

SN65LVDS1DBVR Frequently Asked Questions (FAQs)

  • The maximum cable length supported by the SN65LVDS1DBVR is approximately 10 meters (33 feet) at a data rate of 655 Mbps. However, this length can vary depending on the specific application, cable quality, and noise environment.
  • The differential lines should be terminated with a 100-ohm resistor at the receiving end to minimize reflections and ensure signal integrity. The termination resistor should be placed as close to the receiver as possible.
  • The power consumption of the SN65LVDS1DBVR depends on the operating frequency and output load. At a typical operating frequency of 65 MHz, the power consumption is approximately 135 mW. However, this value can vary depending on the specific application and operating conditions.
  • While the SN65LVDS1DBVR is designed for LVDS applications, it can be used for other differential signaling applications with some limitations. However, the device's performance and signal integrity may not be optimal for non-LVDS applications, and additional circuitry or components may be required to ensure reliable operation.
  • To ensure EMC in an SN65LVDS1DBVR-based design, follow proper PCB layout and design guidelines, use shielding and grounding techniques, and consider adding electromagnetic interference (EMI) filters or common-mode chokes to minimize radiation and susceptibility.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

SN65LVDS1DBVR Overview

Use the download button to access the SN65LVDS1DBVR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN65L, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to SN65LVDS1DBVR

Showing 0 results

SN65LVDS1DBVR Alternates

Showing results

Image Part Number Model
Part Image DS90LV011ATMF National Semiconductor Corporation

Line Driver, 1 Func, 1 Driver, CMOS, PDSO5

Part Image DS90LV011ATMFX National Semiconductor Corporation

Line Driver, 1 Func, 1 Driver, CMOS, PDSO5

Part Image DS90LV011ATMF/NOPB National Semiconductor Corporation

Line Driver, 1 Func, 1 Driver, CMOS, PDSO5

Part Image DS90LV011ATMFX/NOPB National Semiconductor Corporation

Line Driver, 1 Func, 1 Driver, CMOS, PDSO5

Part Image DS90LV011ATMFX Texas Instruments

Line Driver, 1 Func, 1 Driver, CMOS, PDSO5

For a full list of alternate parts for SN65LVDS1DBVR, check out Findchips.com