Part Image

SN65LVDT100DGKRG4 - Texas Instruments

Description: LVDS Interface IC 2 Gbps Repeater/ Translator

Download SN65LVDT100DGKRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
SN65LVDT100DGKRG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - DGK
click to zoom
3D Models
SN65LVDT100DGKRG4 - Texas Instruments  - 3D model - Small Outline Packages - DGK
click to zoom

SN65LVDT100DGKRG4 Details

  • Manufacturer Part Number:

    SN65LVDT100DGKRG4

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    MSOP

  • Pin Count:

    8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-644-A; TIA-644-A

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    0.247 V

  • Output Characteristics:

    DIFFERENTIAL

  • Output Low Current-Max:

    3.3e-7 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.19

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    0.8 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    30 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    0.8 ns

  • Width:

    3 mm

SN65LVDT100DGKRG4 Frequently Asked Questions (FAQs)

  • Texas Instruments provides a recommended PCB layout in the application note SLVAE03, which includes guidelines for component placement, routing, and grounding to minimize noise and ensure reliable operation.
  • Proper termination is critical for high-speed signals. TI recommends using a 100-ohm differential termination resistor at the receiver end, and a 50-ohm single-ended termination resistor at the transmitter end. Additionally, ensure that the PCB trace impedance is matched to the termination resistors.
  • The maximum cable length supported by the SN65LVDT100DGKRG4 depends on the specific application and the type of cable used. However, as a general guideline, TI recommends keeping the cable length below 10 meters for reliable operation at high speeds (up to 100 Mbps).
  • To handle common-mode noise and EMI, TI recommends using a common-mode choke or a ferrite bead in the signal path, and ensuring that the PCB layout is designed to minimize loop areas and reduce radiation. Additionally, consider using shielding or a metal enclosure to reduce EMI.
  • The power consumption of the SN65LVDT100DGKRG4 depends on the operating frequency and mode. According to the datasheet, the typical power consumption is around 135 mW at 100 Mbps. To reduce power consumption, consider using the low-power mode, reducing the operating frequency, or using a lower supply voltage (if possible).

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

SN65LVDT100DGKRG4 Overview

Use the download button to access the SN65LVDT100DGKRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN65L, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to SN65LVDT100DGKRG4

Showing 0 results

SN65LVDT100DGKRG4 Alternates

Showing results

Image Part Number Model
Part Image SN65LVDT100DGK Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8

Part Image SN65LVDT100DGKR Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8

Part Image SN65LVDT100DGKG4 Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8