The maximum cable length depends on the specific application and the signal frequency. As a general rule, the maximum cable length for MLVDS (Multipoint Low-Voltage Differential Signaling) is around 10-15 meters at a frequency of 100 Mbps. However, it's recommended to consult the TI application note 'MLVDS Cable Length and Signal Integrity' (SLAA544) for more detailed information.
The SN65MLVD202D requires a 100-ohm differential termination resistor at the receiving end of the bus. The termination resistor should be placed as close to the receiver as possible to minimize signal reflections. Additionally, the bus should be terminated at both ends to prevent signal reflections and ensure reliable operation.
The SN65MLVD202D can operate with an input voltage as low as 2.3V, but it's recommended to use a minimum input voltage of 2.5V to ensure reliable operation and meet the specified electrical characteristics.
Yes, the SN65MLVD202D can be used in a point-to-point application, but it's not the most efficient use of the device. The SN65MLVD202D is designed for multipoint applications, and using it in a point-to-point application may not take full advantage of its capabilities. However, if you still want to use it in a point-to-point application, make sure to follow the recommended layout and termination guidelines to ensure reliable operation.
The SN65MLVD202D is not designed to handle hot swapping or hot plugging. If you need to hot swap or hot plug devices, you should use external circuitry to ensure that the bus is properly terminated and that the device is not damaged during the hot swap or hot plug process. TI recommends using a hot swap controller or a power switch to handle hot swapping or hot plugging.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SN65MLVD202D Overview
Use the download button to access the SN65MLVD202D schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN65M,
or try a keyword search, such as Line Driver or Receivers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
