The maximum clock frequency of the SN74ALS174D is typically around 100 MHz, but it can vary depending on the specific application and operating conditions. It's recommended to check the device's timing specifications and perform simulations to ensure reliable operation at the desired clock frequency.
To ensure proper power and decoupling, make sure to follow the recommended power supply voltage and decoupling capacitor values specified in the datasheet. Typically, a 0.1 μF ceramic capacitor should be placed as close as possible to the device's power pins, and a 10 μF electrolytic capacitor should be placed near the power supply. Additionally, ensure that the power supply voltage is within the recommended range of 4.5 V to 5.5 V.
The recommended termination scheme for the SN74ALS174D's outputs is to use a series resistor (Rs) and a parallel capacitor (Cp) to match the impedance of the transmission line. The values of Rs and Cp depend on the specific application and transmission line characteristics, but a typical value for Rs is around 33 Ω and for Cp is around 10 pF.
The asynchronous reset input (R) should be driven low to reset the device. When the reset input is low, all outputs are forced low, and the device is reset to its initial state. It's recommended to use a pull-up resistor to ensure that the reset input is not left floating, and to use a debouncing circuit to ensure that the reset signal is clean and glitch-free.
The SN74ALS174D is not specifically designed to be radiation-hardened, and its radiation tolerance is not explicitly specified in the datasheet. However, Texas Instruments provides radiation-hardened versions of the device, such as the SNJ54ALS174D, which are designed to meet specific radiation tolerance requirements.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SN74ALS174D Overview
Use the download button to access the SN74ALS174D schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN74A,
or try a keyword search, such as FF/Latches
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
