The maximum clock frequency of the SN74ALS174N is typically around 100 MHz, but it can vary depending on the specific application and operating conditions. It's recommended to check the device's timing specifications and perform simulations to ensure reliable operation at the desired frequency.
To ensure proper power and decoupling, connect the VCC pin to a stable 5V power supply, and decouple the power pins with 0.1uF ceramic capacitors. Additionally, use a 10uF electrolytic capacitor to filter out any noise on the power line. Make sure to follow proper PCB layout and routing guidelines to minimize noise and signal integrity issues.
The recommended input termination for the SN74ALS174N is a series resistor of 33-50 ohms, followed by a 50-ohm transmission line. For output termination, a 50-ohm resistor to VCC or GND is recommended. However, the specific termination requirements may vary depending on the application and signal integrity requirements.
The asynchronous reset input (CLR) on the SN74ALS174N should be driven by a signal that meets the device's input voltage and timing specifications. It's recommended to use a pull-up resistor to ensure the CLR input is properly biased, and to avoid floating or undefined states. Additionally, ensure that the CLR signal is synchronized with the clock signal to avoid metastability issues.
The maximum capacitive load that the SN74ALS174N can drive is typically around 100-150 pF, depending on the specific application and operating conditions. Exceeding this limit may result in signal integrity issues, increased power consumption, and reduced device reliability. It's recommended to use buffers or repeaters to drive heavy capacitive loads.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
SN74ALS174N Overview
Use the download button to access the SN74ALS174N schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN74A,
or try a keyword search, such as FF/Latches
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
