Part Image

SN75176BDRE4 - Texas Instruments

Description: RS-422/RS-485 Interface IC Differential Bus Transceiver

Download SN75176BDRE4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
SN75176BDRE4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A
click to zoom
3D Models
SN75176BDRE4 - Texas Instruments  - 3D model - Small Outline Packages - D0008A
click to zoom

SN75176BDRE4 Details

  • Manufacturer Part Number:

    SN75176BDRE4

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    SOP-8

  • Pin Count:

    8

  • Country Of Origin:

    Malaysia, Mexico

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Additional Feature:

    3-STATE DRIVER AND RECEIVER OUTPUTS

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.00002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.008 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    35 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    70 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Supply Voltage1-Max:

    5.25 V

  • Supply Voltage1-Min:

    4.75 V

  • Supply Voltage1-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    22 ns

  • Width:

    3.9 mm

SN75176BDRE4 Frequently Asked Questions (FAQs)

  • The maximum cable length supported by the SN75176BDRE4 is approximately 100 meters (328 feet) for a single twisted pair, assuming a data rate of 100 Mbps.
  • To ensure EMC, follow proper PCB layout guidelines, use a shielded cable, and consider adding common-mode chokes or ferrite beads to the transmission lines. Additionally, ensure the device is properly grounded and decoupled.
  • The recommended termination scheme for the SN75176BDRE4 is a 100-ohm differential termination resistor at the receiving end of the transmission line.
  • Yes, the SN75176BDRE4 can be used for other applications that require a high-speed, differential transceiver, such as industrial automation, medical devices, or other high-speed data transmission applications.
  • To handle hot swapping or hot plugging, ensure the device is powered down before disconnecting or connecting the cable. Additionally, consider using a hot swap controller or a power switch to control the power supply to the device.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

SN75176BDRE4 Overview

Use the download button to access the SN75176BDRE4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN751, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to SN75176BDRE4

Showing 0 results

SN75176BDRE4 Alternates

Showing results

Image Part Number Model
Part Image MAX485EESA+T Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8

Part Image SP1486EEN-L/TR MaxLinear Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8

Part Image LMS1485IMX Texas Instruments

Line Transceiver

Part Image LMS1485IM/NOPB Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ADM1485JR-REEL7 Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

For a full list of alternate parts for SN75176BDRE4, check out Findchips.com