Part Image

SN75HVD08DRG4 - Texas Instruments

Description: Single Transmitter/Receiver RS-485 8-Pin SOIC T/R

Download SN75HVD08DRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
SN75HVD08DRG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A
click to zoom
3D Models
SN75HVD08DRG4 - Texas Instruments  - 3D model - Small Outline Packages - D0008A
click to zoom

SN75HVD08DRG4 Details

  • Manufacturer Part Number:

    SN75HVD08DRG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    GREEN, PLASTIC, SOIC-8

  • Pin Count:

    8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.0001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485-A; TIA-485-A; ISO 8482E

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.0001 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    70 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    16 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    5 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    40 ns

  • Width:

    3.9 mm

SN75HVD08DRG4 Frequently Asked Questions (FAQs)

  • The maximum cable length supported by the SN75HVD08DRG4 depends on the baud rate and the type of cable used. As a general rule, the maximum cable length is around 100 meters at 9600 bps and 10 meters at 115200 bps. However, it's recommended to consult the RS-485 standard and perform signal integrity analysis to determine the maximum cable length for a specific application.
  • The SN75HVD08DRG4 is a half-duplex transceiver, meaning it can only transmit or receive at a given time. To configure it for half-duplex operation, connect the DE (driver enable) pin to the RE (receiver enable) pin. For full-duplex operation, use two separate transceivers, one for transmission and one for reception.
  • The minimum supply voltage for the SN75HVD08DRG4 is 3.0V, and the maximum supply voltage is 5.5V. Operating the device outside of this range may affect its performance and reliability.
  • To protect the SN75HVD08DRG4 from ESD and surge events, use TVS (transient voltage suppression) diodes or surge protectors on the RS-485 bus lines. Additionally, follow proper PCB layout and design practices to minimize the risk of ESD damage.
  • Yes, the SN75HVD08DRG4 can be used in a multi-point or multi-drop configuration. However, it's essential to ensure that the total bus load does not exceed the maximum recommended value, and that the devices are properly terminated to prevent signal reflections.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

SN75HVD08DRG4 Overview

Use the download button to access the SN75HVD08DRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN75H, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to SN75HVD08DRG4

Showing 0 results

SN75HVD08DRG4 Alternates

Showing results

Image Part Number Model
Part Image SN75HVD08D Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image SN75HVD08DR Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image SN65HVD08DRG4 Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image SN75HVD08DG4 Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image SN65HVD08DG4 Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

For a full list of alternate parts for SN75HVD08DRG4, check out Findchips.com