Please enter a minimum 3 letters or numbers
Technical Content
Part Image

STOTG04EQTR - STMicroelectronics

Description: USB-OTG Full-speed Transceiver with USB, UART, Audio and I2C Operating Modes

Download STOTG04EQTR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
STOTG04EQTR - STMicroelectronics - PCB symbol
click to zoom
PCB Footprints
STOTG04EQTR - STMicroelectronics PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - QFN24 (4x4) MECHANICAL DATA-
click to zoom
3D Models
STOTG04EQTR - STMicroelectronics - 3D model - Quad Flat No-Lead - QFN24 (4x4) MECHANICAL DATA-
click to zoom

STOTG04EQTR Details

  • Manufacturer Part Number:

    STOTG04EQTR

  • Brand Name:

    STMicroelectronics

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFN

  • Package Description:

    4 X 4 MM, LEAD FREE, QFN-24

  • Pin Count:

    24

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    16 Weeks

  • Manufacturer:

    STMicroelectronics

  • YTEOL:

    7

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    GENERAL PURPOSE

  • JESD-30 Code:

    S-XQCC-N24

  • JESD-609 Code:

    e3

  • Length:

    4 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    24

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    2.6 V

  • Output Low Current-Max:

    0.002 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC24,.16SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    24 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1 mm

  • Supply Current-Max:

    25 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    1.6 V

  • Supply Voltage-Nom:

    1.8 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    2.7 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Transmit Delay-Max:

    300 ns

  • Width:

    4 mm

STOTG04EQTR Frequently Asked Questions (FAQs)

  • A good PCB layout for STOTG04EQTR involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the USB traces. It's also recommended to use a common mode filter and a shielded cable to reduce EMI.
  • To ensure reliable data transmission with STOTG04EQTR, make sure to use a reliable crystal oscillator, implement proper error handling and retries, and use a robust communication protocol such as USB 2.0. Additionally, ensure that the device is properly powered and that the PCB layout is optimized for signal integrity.
  • STOTG04EQTR has a maximum junction temperature of 150°C. To ensure reliable operation, it's essential to provide adequate heat dissipation, such as using a heat sink or a thermal pad, and to avoid overheating the device. The device should be operated within the recommended temperature range of -40°C to 85°C.
  • STOTG04EQTR has a built-in overcurrent protection feature that can be enabled by connecting the OCP pin to a resistor and a capacitor. The device will automatically shut down if the current exceeds the programmed threshold. Additionally, an external overcurrent protection circuit can be implemented using a dedicated IC or a PTC fuse.
  • STOTG04EQTR has built-in ESD protection, but it's still essential to take precautions during handling and assembly to prevent damage. Use an ESD wrist strap or mat, and ensure that the device is properly grounded during assembly. Additionally, consider adding external ESD protection devices, such as TVS diodes, to protect the device from external ESD events.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

STOTG04EQTR Overview

Use the download button to access the STOTG04EQTR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like STOTG, or try a keyword search, such as Line Driver or Receivers

About STMicroelectronics

STMicroelectronics (ST) is a global semiconductor company that designs, manufactures, and markets a broad range of integrated circuits (ICs), discrete devices, and other electronic components. STMicroelectronics offers a diverse portfolio of semiconductor products covering a wide range of applications and industries. Their product categories include microcontrollers, analog and mixed-signal ICs, MEMS (Micro-Electro-Mechanical Systems) sensors, power management ICs, RF (Radio Frequency) transceivers, aut

Parts related to STOTG04EQTR

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑