The recommended PCB layout for the TLP385 involves placing the device close to the photodiode, using a ground plane to reduce noise, and minimizing the length of the traces between the device and the photodiode. Additionally, it's recommended to use a 0.1uF bypass capacitor between VCC and GND to reduce noise and ensure stable operation.
To ensure proper biasing, the TLP385 requires a supply voltage (VCC) between 2.7V and 5.5V, and a pull-up resistor (RPU) between the OUT pin and VCC. The value of RPU should be chosen based on the specific application requirements, but a typical value is 1kΩ to 10kΩ. Additionally, the photodiode should be biased with a reverse voltage (VR) between 2V and 5V.
The TLP385 is rated for operation over a temperature range of -40°C to 85°C. However, it's recommended to operate the device within a temperature range of 0°C to 70°C for optimal performance and reliability.
The TLP385 has built-in ESD protection, but it's still recommended to take precautions during handling and assembly to prevent damage. This includes using an anti-static wrist strap, anti-static mat, and anti-static packaging materials. Additionally, it's recommended to use a TVS (Transient Voltage Suppressor) diode or other ESD protection devices on the PCB to protect the TLP385 and other components from ESD events.
The typical response time of the TLP385 is around 10μs to 20μs, depending on the specific application and operating conditions. However, this can vary depending on the photodiode used, the biasing conditions, and other factors.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TLP385(GR,E Overview
Use the download button to access the TLP385(GR,E schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLP38,
or try a keyword search, such as Optocoupler
