Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signals separate. Additionally, use short traces and avoid crossing digital and analog signals. Refer to the TI application note 'PCB Layout Guidelines for Analog-to-Digital Converters' for more information.
The TLV1543IDBR requires a clock signal with a frequency between 1.5 MHz and 6 MHz. The clock source should have a low jitter and a duty cycle close to 50%. A crystal oscillator or a high-quality clock generator is recommended. The clock signal should be connected to the CLK pin, and the clock frequency should be set according to the desired conversion rate.
The recommended power-up sequence is to apply VCC first, followed by VREF, and then the clock signal. When powering down, the sequence should be reversed. The power-down mode is entered by setting the PD pin low. In power-down mode, the device consumes minimal power, but the internal reference and oscillator are disabled.
The TLV1543IDBR has an internal self-calibration feature that can be initiated by setting the CAL pin high. The device also supports external calibration using an external reference voltage. The calibration options include offset calibration, gain calibration, and linearity calibration. Refer to the datasheet for more information on the calibration procedure.
The TLV1543IDBR is rated for operation over a temperature range of -40°C to 125°C. To ensure reliable operation, the device should be operated within the recommended temperature range, and the thermal dissipation should be managed properly. A thermal pad is available on the package to help dissipate heat. Refer to the datasheet for more information on thermal considerations.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TLV1543IDBR Overview
Use the download button to access the TLV1543IDBR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLV15,
or try a keyword search, such as Analog to Digital Converters
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
