Part Image

TLV2782CDG4 - Texas Instruments

Description: Operational Amplifiers - Op Amps Dual 1.8V RRIO 8MH Amplifier

Download TLV2782CDG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TLV2782CDG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A  SOIC
click to zoom
3D Models
TLV2782CDG4 - Texas Instruments  - 3D model - Small Outline Packages - D0008A  SOIC
click to zoom

TLV2782CDG4 Details

  • Manufacturer Part Number:

    TLV2782CDG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Mexico, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.0001 µA

  • Bias Current-Max (IIB) @25C:

    0.000015 µA

  • Common-mode Reject Ratio-Min:

    55 dB

  • Common-mode Reject Ratio-Nom:

    80 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.000015 µA

  • Input Offset Voltage-Max:

    3000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    1.89 V/us

  • Slew Rate-Nom:

    5 V/us

  • Subcategory:

    Operational Amplifier

  • Supply Current-Max:

    1.54 mA

  • Supply Voltage Limit-Max:

    4 V

  • Supply Voltage-Nom (Vsup):

    2.7 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    8000

  • Voltage Gain-Min:

    50000

  • Wideband:

    NO

  • Width:

    3.9 mm

TLV2782CDG4 Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a star-ground connection and a symmetrical layout to minimize noise and ensure optimal performance. Keep the input and output traces short and separate to prevent coupling. Refer to the TI application note 'AN-1187: PCB Layout Guidelines for Switching Regulators' for more information.
  • Select an output capacitor with a low ESR (Equivalent Series Resistance) and a high ripple current rating. A 10uF to 22uF ceramic capacitor with an X5R or X7R dielectric is recommended. Ensure the capacitor is rated for the output voltage and can handle the maximum output current.
  • The TLV2782CDG4 can handle a maximum input voltage of 15V, but it's recommended to operate within the specified input voltage range of 2.7V to 12V for optimal performance and reliability.
  • The output voltage of the TLV2782CDG4 is set by the resistor divider network (R1 and R2) connected to the FB pin. Use the formula: Vout = 1.25V x (1 + R2/R1) to calculate the output voltage. Ensure the resistors are 1% tolerance or better for accurate output voltage regulation.
  • The EN (Enable) pin is used to turn the regulator on or off. When the EN pin is pulled high (above 1.5V), the regulator is enabled, and when it's pulled low (below 0.5V), the regulator is disabled. This pin can be used to implement power sequencing or to reduce power consumption in standby modes.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLV2782CDG4 Overview

Use the download button to access the TLV2782CDG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLV27, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TLV2782CDG4

Showing 0 results

TLV2782CDG4 Alternates

Showing results

Image Part Number Model
Part Image TLV2782CDR Texas Instruments

Operational Amplifier, 2 Func, 3000uV Offset-Max, CMOS, PDSO8

Part Image TLV2782CD Texas Instruments

Operational Amplifier, 2 Func, 3000uV Offset-Max, CMOS, PDSO8