Part Image

TLV4111IDG4 - Texas Instruments

Description: Operational Amplifiers - Op Amps High Output Drive Low Voltage Single

Download TLV4111IDG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TLV4111IDG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A
click to zoom
3D Models
TLV4111IDG4 - Texas Instruments  - 3D model - Small Outline Packages - D0008A
click to zoom

TLV4111IDG4 Details

  • Manufacturer Part Number:

    TLV4111IDG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Country Of Origin:

    Mexico

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.0005 µA

  • Bias Current-Max (IIB) @25C:

    0.000025 µA

  • Common-mode Reject Ratio-Min:

    68 dB

  • Common-mode Reject Ratio-Nom:

    68 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.000025 µA

  • Input Offset Voltage-Max:

    3500 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    YES

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    0.55 V/us

  • Slew Rate-Nom:

    1.57 V/us

  • Supply Current-Max:

    1 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    2700

  • Voltage Gain-Min:

    7943

  • Wideband:

    NO

  • Width:

    3.9 mm

TLV4111IDG4 Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the TLV4111IDG4 is dependent on the ambient temperature and the package type. For the SOIC package, the maximum power dissipation is 670mW at 25°C ambient temperature. However, it's recommended to derate the power dissipation to ensure reliable operation.
  • To ensure stability in a unity-gain buffer configuration, it's recommended to add a capacitor (typically 10nF to 100nF) between the output and the inverting input pins. This capacitor helps to compensate for the internal pole of the op-amp and prevents oscillations.
  • To minimize noise and EMI, it's recommended to follow good PCB layout practices, such as keeping the input and output traces separate, using a solid ground plane, and placing decoupling capacitors close to the op-amp. Additionally, it's recommended to use a low-impedance power supply and to avoid running high-frequency signals near the op-amp.
  • While the TLV4111IDG4 can be used as a comparator, it's not recommended due to its relatively slow slew rate (0.5V/μs) and limited bandwidth (3MHz). Texas Instruments recommends using a dedicated comparator, such as the TLV7031, for comparator applications.
  • The TLV4111IDG4 has internal ESD protection diodes, but it's still recommended to follow proper ESD handling procedures when handling the device. Additionally, it's recommended to use external ESD protection devices, such as TVS diodes, to protect the op-amp from external ESD events.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLV4111IDG4 Overview

Use the download button to access the TLV4111IDG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLV41, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TLV4111IDG4

Showing 0 results

TLV4111IDG4 Alternates

Showing results

Image Part Number Model
Part Image TLV4111IDRG4 Texas Instruments

Operational Amplifier, 1 Func, 4000uV Offset-Max, CMOS, PDSO8