Part Image

TLV9041IDBVR - Texas Instruments

Description: Operational Amplifiers - Op Amps 1.2-V ultra-low voltage, 350-kHz power saving single-channel op amp for battery powered systems 5-SOT-23 -40 to 125

Download TLV9041IDBVR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TLV9041IDBVR - Texas Instruments PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - DBV
click to zoom
3D Models
TLV9041IDBVR - Texas Instruments  - 3D model - SOT23 (5-Pin) - DBV
click to zoom

TLV9041IDBVR Details

  • Manufacturer Part Number:

    TLV9041IDBVR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.000012 µA

  • Bias Current-Max (IIB) @25C:

    0.000012 µA

  • Common-mode Reject Ratio-Min:

    75 dB

  • Common-mode Reject Ratio-Nom:

    89 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.00001 µA

  • Input Offset Voltage-Max:

    2250 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e4

  • Length:

    2.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    SOP5,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Nom:

    0.2 V/us

  • Supply Current-Max:

    0.013 mA

  • Supply Voltage Limit-Max:

    3 V

  • Supply Voltage-Nom (Vsup):

    1.2 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    350

  • Voltage Gain-Min:

    223872.113

  • Wideband:

    NO

  • Width:

    1.6 mm

TLV9041IDBVR Frequently Asked Questions (FAQs)

  • A good PCB layout for TLV9041IDBVR involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the input and output traces. Additionally, it's recommended to use a separate analog ground plane and to keep the analog and digital grounds separate.
  • To ensure stability and prevent oscillations, it's essential to follow the recommended PCB layout, use the correct output capacitor value, and ensure that the input and output impedance are matched. Additionally, it's recommended to add a small series resistor (e.g., 10-20 ohms) between the output and the load to prevent oscillations.
  • The maximum input voltage that can be applied to the TLV9041IDBVR is 6.5V. Exceeding this voltage can cause damage to the device.
  • The TLV9041IDBVR is rated for operation up to 125°C. However, it's essential to consider the device's power dissipation and thermal management when operating in high-temperature environments. Ensure that the device is properly heat-sinked and that the junction temperature (TJ) does not exceed 150°C.
  • The output voltage of the TLV9041IDBVR can be calculated using the following formula: VOUT = (VIN x (R1/R2)) + VREF, where VIN is the input voltage, R1 and R2 are the feedback resistors, and VREF is the internal reference voltage (1.2V for the TLV9041IDBVR).

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLV9041IDBVR Overview

Use the download button to access the TLV9041IDBVR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLV90, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TLV9041IDBVR

Showing 0 results