Part Image

TMS320VC5402PGER10 - Texas Instruments

Description: Digital Signal Processors & Controllers - DSP, DSC Dig Signal Proc

Download TMS320VC5402PGER10 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TMS320VC5402PGER10 - Texas Instruments PCB footprint - Quad Flat Packages - Quad Flat Packages - PGE (S-PQFP-G144)
click to zoom
3D Models
TMS320VC5402PGER10 - Texas Instruments  - 3D model - Quad Flat Packages - PGE (S-PQFP-G144)
click to zoom

TMS320VC5402PGER10 Details

  • Manufacturer Part Number:

    TMS320VC5402PGER10

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFP

  • Pin Count:

    144

  • Country Of Origin:

    Philippines

  • ECCN Code:

    3A991.A.2

  • HTS Code:

    8542.31.00.35

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Additional Feature:

    ALSO OPERATES AT 3.3V SUPPLY

  • Address Bus Width:

    20

  • Barrel Shifter:

    YES

  • Bit Size:

    16

  • Boundary Scan:

    YES

  • Clock Frequency-Max:

    20 MHz

  • External Data Bus Width:

    16

  • Format:

    FIXED POINT

  • Integrated Cache:

    NO

  • Internal Bus Architecture:

    MULTIPLE

  • JESD-30 Code:

    S-PQFP-G144

  • JESD-609 Code:

    e4

  • Length:

    20 mm

  • Low Power Mode:

    YES

  • Moisture Sensitivity Level:

    1

  • Number of DMA Channels:

    6

  • Number of External Interrupts:

    4

  • Number of Terminals:

    144

  • Number of Timers:

    2

  • On Chip Data RAM Width:

    16

  • On Chip Program ROM Width:

    16

  • Operating Temperature-Max:

    100 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LFQFP

  • Package Equivalence Code:

    QFP144,.87SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • RAM (words):

    16384

  • ROM Programmability:

    MROM

  • Seated Height-Max:

    1.6 mm

  • Supply Voltage-Max:

    1.98 V

  • Supply Voltage-Min:

    1.71 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    20 mm

  • uPs/uCs/Peripheral ICs Type:

    DIGITAL SIGNAL PROCESSOR, OTHER

TMS320VC5402PGER10 Frequently Asked Questions (FAQs)

  • The recommended power-up sequence is to apply VDD (1.8V) first, followed by VDDA (1.8V), and then VDDS (3.3V). This ensures proper initialization of the device.
  • The EMIF can be configured using the EMIF control registers (EMCR) and the memory timing registers (MTIM). The configuration depends on the type of memory used (e.g., SDRAM, Flash, etc.). Refer to the TMS320VC5402PGER10 TRM (Technical Reference Manual) for detailed information.
  • The maximum clock frequency supported by the TMS320VC5402PGER10 is 100 MHz. However, the actual clock frequency may be limited by the specific application and the clock source used.
  • The TMS320VC5402PGER10 has a built-in watchdog timer (WDT) module. The WDT can be enabled and configured using the WDT control registers (WDTCR). The WDT can be used to reset the device in case of a software or hardware fault.
  • The JTAG (Joint Test Action Group) interface is used for debugging and testing the device. It allows for boundary scan, device identification, and flash programming. The JTAG interface can also be used for real-time debugging and tracing of the device.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TMS320VC5402PGER10 Overview

Use the download button to access the TMS320VC5402PGER10 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TMS32, or try a keyword search, such as Digital Signal Processors

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TMS320VC5402PGER10

Showing 0 results

TMS320VC5402PGER10 Alternates

Showing results

Image Part Number Model
Part Image TMS320VC5401PGE50 Texas Instruments

Digital Signal Processor, 32-Bit Size, 16-Ext Bit, 20MHz, CMOS, PQFP144

Part Image TMS320VC5401PGE Texas Instruments

Digital Signal Processor, 16-Bit Size, 16-Ext Bit, 20MHz, CMOS, PQFP144

Part Image TMS320UC5402PGE-80 Texas Instruments

Digital Signal Processor, 16-Bit Size, 16-Ext Bit, 20MHz, CMOS, PQFP144

Part Image TMS320UC5402PGE Texas Instruments

Digital Signal Processor, 16-Bit Size, 16-Ext Bit, 20MHz, CMOS, PQFP144

Part Image TMX320VC5402PGE100 Texas Instruments

Digital Signal Processor, 16-Bit Size, 16-Ext Bit, 20MHz, CMOS, PQFP144

For a full list of alternate parts for TMS320VC5402PGER10, check out Findchips.com