Part Image

TPS3808G01DRVT - Texas Instruments

Description: Texas Instruments TPS3808G01DRVT, Voltage Supervisor 0.405V max., Reset Input, 6-Pin SON

Download TPS3808G01DRVT Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TPS3808G01DRVT - Texas Instruments PCB footprint - Small Outline No-lead - Small Outline No-lead - DRV0006A
click to zoom
3D Models
TPS3808G01DRVT - Texas Instruments  - 3D model - Small Outline No-lead - DRV0006A
click to zoom

TPS3808G01DRVT Details

  • Manufacturer Part Number:

    TPS3808G01DRVT

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SON

  • Pin Count:

    6

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Additional Feature:

    BAT BUP SW:N;MNL RST:N;OV DET:N;PW FL IP:N;PW FL IO:N;PW FL OP:N;PRG RST DLY:Y;UV DET:N;WD:N;WWD:N

  • Adjustable Threshold:

    YES

  • Analog IC - Other Type:

    VOLTAGE SUPERVISOR/RESET IC

  • JESD-30 Code:

    S-PDSO-N6

  • JESD-609 Code:

    e4

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC6,.08,25

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max (Isup):

    0.006 mA

  • Supply Voltage-Max (Vsup):

    6.5 V

  • Supply Voltage-Min (Vsup):

    1.8 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Threshold Voltage-Nom:

    +0.405V

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    2 mm

TPS3808G01DRVT Frequently Asked Questions (FAQs)

  • The recommended layout and placement for the TPS3808G01DRVT involves placing the device close to the power source, using a solid ground plane, and keeping the input and output capacitors close to the device. A 4-layer PCB with a solid ground plane is recommended. Refer to the Texas Instruments application note 'TPS3808 Layout and Placement Guidelines' for more information.
  • The choice of input and output capacitors for the TPS3808G01DRVT depends on the specific application requirements. A general guideline is to use low-ESR capacitors with a minimum capacitance of 10uF for the input and output. X5R or X7R ceramic capacitors are recommended. The capacitor selection should also consider the voltage rating, temperature range, and ripple current requirements.
  • The TPS3808G01DRVT can handle a maximum input voltage of 6.5V. Exceeding this voltage may cause damage to the device. It is recommended to use a voltage regulator or a voltage limiter to ensure that the input voltage does not exceed the maximum rating.
  • The TPS3808G01DRVT has a built-in overvoltage protection (OVP) feature that can be enabled by connecting the OVP pin to a voltage source. The OVP threshold is set by the voltage on the OVP pin. When the input voltage exceeds the OVP threshold, the device will shut down to protect the downstream circuitry.
  • The typical startup time for the TPS3808G01DRVT is around 1ms. However, this time can vary depending on the input voltage, output capacitance, and other factors. It is recommended to consult the datasheet and application notes for more information on startup time and power-up sequencing.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TPS3808G01DRVT Overview

Use the download button to access the TPS3808G01DRVT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPS38, or try a keyword search, such as Power Management Circuits

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TPS3808G01DRVT

Showing 0 results

TPS3808G01DRVT Alternates

Showing results

Image Part Number Model
Part Image TPS3808G01QDRVRQ1 Texas Instruments

Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +0.405V, PDSO6

Part Image TPS3808G01DRVR Texas Instruments

Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +0.405V, PDSO6

Part Image PT7M3808G01ZCE Diodes Incorporated

Voltage Supervisor/Reset IC, Fixed, 1 Channel, +0.405V, PDSO6

Part Image TPS3808G01DRVTG4 Texas Instruments

Voltage Supervisor/Reset IC, Fixed, 1 Channel, +0.405V, CMOS, PDSO6

Part Image TPS3808G01DRVRG4 Texas Instruments

Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +0.405V, PDSO6

For a full list of alternate parts for TPS3808G01DRVT, check out Findchips.com