The recommended layout and placement for the TPS3813I50DBVT involves placing the device close to the power source, using a solid ground plane, and keeping the input and output traces short and wide to minimize inductance and resistance. Additionally, it is recommended to place a 10uF ceramic capacitor between the VIN and GND pins to filter out noise and ensure stable operation.
To ensure the TPS3813I50DBVT is properly powered up and initialized, apply a valid input voltage (VIN) between 2.7V and 5.5V, and ensure the EN pin is high (logic level) to enable the device. Wait for the POR (Power-On Reset) timeout period (typically 1.5ms) before applying a valid input signal to the input pins.
The maximum allowed voltage on the input pins of the TPS3813I50DBVT is 5.5V. Exceeding this voltage may cause damage to the device. It is recommended to use a voltage limiter or clamp circuit to prevent overvoltage conditions.
To handle thermal considerations for the TPS3813I50DBVT, ensure good thermal conductivity between the device and the PCB, use a thermal pad or heat sink if necessary, and avoid blocking airflow around the device. The maximum junction temperature (TJ) is 150°C, and the device should be operated within the recommended operating temperature range of -40°C to 85°C.
The recommended ESD protection for the TPS3813I50DBVT involves using a TVS (Transient Voltage Suppressor) diode or a Zener diode with a voltage rating greater than the maximum input voltage, connected between the input pins and GND. This helps protect the device from electrostatic discharge events.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPS3813I50DBVT Overview
Use the download button to access the TPS3813I50DBVT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPS38,
or try a keyword search, such as Power Management Circuits
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
