A good PCB layout for the TPS389001DSER involves placing the device close to the power source, using a solid ground plane, and keeping the input and output traces short and wide to minimize inductance and resistance. Additionally, it's recommended to use a 10uF ceramic capacitor at the input and a 1uF ceramic capacitor at the output to filter out noise and ripple.
When choosing an output capacitor for the TPS389001DSER, consider the output voltage, output current, and ripple requirements. A general rule of thumb is to use a capacitor with a capacitance value of at least 10uF and a voltage rating of at least 1.5 times the output voltage. X5R or X7R ceramic capacitors are good options due to their low ESR and high reliability.
The TPS389001DSER can handle input voltages up to 6.5V, but it's recommended to keep the input voltage below 5.5V to ensure reliable operation and minimize power dissipation. Exceeding the maximum input voltage can lead to reduced performance, increased power consumption, and potentially damage the device.
The TPS389001DSER has a built-in overcurrent protection feature that limits the output current to 1.5A. To implement overcurrent protection, connect a sense resistor (Rs) between the output pin and the GND pin. The device will limit the output current when the voltage across Rs exceeds 0.2V. You can adjust the sense resistor value to set the desired overcurrent threshold.
The thermal derating curve for the TPS389001DSER is not explicitly stated in the datasheet, but it can be estimated based on the device's thermal resistance (RθJA) and maximum junction temperature (Tj). As a general guideline, the device's output current should be derated by 1.5mA/°C above 25°C to ensure reliable operation and prevent overheating.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPS389001DSER Overview
Use the download button to access the TPS389001DSER schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPS38,
or try a keyword search, such as Power Management Circuits
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
