Part Image

TPS7B8250EPWPRQ1 - Texas Instruments

Description: LDO Voltage Regulators Automotive 300-mA, off-battery (40-V), ultra-low-IQ, low-dropout voltage regulator with enable

Download TPS7B8250EPWPRQ1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
TPS7B8250EPWPRQ1 - Texas Instruments  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

TPS7B8250EPWPRQ1 Details

  • Manufacturer Part Number:

    TPS7B8250EPWPRQ1

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Adjustability:

    FIXED

  • Dropout Voltage1-Max:

    1.17 V

  • Dropout Voltage1-Nom:

    0.4 V

  • Input Voltage Absolute-Max:

    45 V

  • Input Voltage-Max:

    40 V

  • Input Voltage-Min:

    6.17 V

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e4

  • Length:

    5 mm

  • Line Regulation-Max:

    0.01%

  • Load Regulation-Max(%):

    0.02%

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    14

  • Operating Temperature TJ-Max:

    165 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Operating Temperature-Max:

    165 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current1-Max:

    0.3 A

  • Output Voltage1-Max:

    5.075 V

  • Output Voltage1-Min:

    4.925 V

  • Output Voltage1-Nom:

    5 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HTSSOP

  • Package Equivalence Code:

    TSSOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 13 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.2 mm

  • Surface Mount:

    YES

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Voltage Tolerance-Max:

    1.5%

  • Width:

    4.4 mm

TPS7B8250EPWPRQ1 Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a 2-layer or 4-layer PCB with a solid ground plane and a thermal relief pattern under the device to ensure optimal thermal performance. A minimum of 2 oz copper thickness is recommended for the top and bottom layers.
  • To ensure stability and prevent oscillations, it is recommended to use a minimum output capacitance of 10uF, and to place the output capacitor as close as possible to the output pin. Additionally, a 1uF to 10uF ceramic capacitor can be placed between the VIN and GND pins to filter out high-frequency noise.
  • The TPS7B8250EPWPRQ1 has an absolute maximum rating of 6.5V for the input voltage. Applying a voltage higher than this can cause permanent damage to the device.
  • The TPS7B8250EPWPRQ1 is rated for operation up to 125°C junction temperature. However, the device's performance and reliability may degrade at high temperatures. It is recommended to derate the output current and voltage according to the temperature derating curve provided in the datasheet.
  • The power dissipation of the TPS7B8250EPWPRQ1 can be calculated using the formula: Pd = (VIN - VOUT) x IOUT + (VIN x IQ), where IQ is the quiescent current. The maximum power dissipation is limited by the thermal resistance of the package and the ambient temperature.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

TPS7B8250EPWPRQ1 Overview

Use the download button to access the TPS7B8250EPWPRQ1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like TPS7B, or try a keyword search, such as Linear Regulator ICs

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TPS7B8250EPWPRQ1

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview