The maximum cable length for the TRS232N is dependent on the baud rate and the quality of the cable. As a general rule, the maximum cable length is around 50-100 feet at 9600 baud, but it can be shorter at higher baud rates. It's recommended to use a high-quality cable with proper shielding to minimize signal degradation.
Yes, the TRS232N can be used in a 3.3V system. The device is compatible with 3.3V and 5V logic levels, and it can operate from a single 3.3V or 5V supply. However, the output voltage levels will be limited to the supply voltage, so the device may not be able to drive a 5V load from a 3.3V supply.
The flow control pins (RTS and CTS) are used to control the flow of data between the transmitter and receiver. In a typical application, the RTS pin is used by the transmitter to request permission to send data, and the CTS pin is used by the receiver to indicate when it is ready to receive data. If flow control is not required, these pins can be tied together or left unconnected.
The TRS232N and the MAX232 are both RS-232 transceivers, but they have some differences. The TRS232N is a lower-power, lower-cost device that is optimized for low-power applications, while the MAX232 is a more traditional RS-232 transceiver that is compatible with a wider range of systems. The TRS232N also has a smaller package size and a lower operating voltage range than the MAX232.
The TRS232N has built-in ESD protection, but it's still important to take precautions to protect the device from transient events. This can include using TVS diodes, resistors, and capacitors to filter out noise and spikes, as well as following proper PCB layout and design practices to minimize the risk of damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TRS232N Overview
Use the download button to access the TRS232N schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TRS23,
or try a keyword search, such as Line Driver or Receivers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
Suggested Parts
If you searched for TRS232N, you might also be interested in these parts:
