Part Image

TRS3222EIPWR - Texas Instruments

Description: 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver With +/-15-kV ESD Protection

Download TRS3222EIPWR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TRS3222EIPWR - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - PW0020A
click to zoom
3D Models
TRS3222EIPWR - Texas Instruments  - 3D model - Small Outline Packages - PW0020A
click to zoom

TRS3222EIPWR Details

  • Manufacturer Part Number:

    TRS3222EIPWR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSSOP

  • Package Description:

    TSSOP-20

  • Pin Count:

    20

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Additional Feature:

    ALSO OPERATES AT 5V SUPPLY

  • Differential Output:

    NO

  • Driver Number of Bits:

    2

  • High Level Input Current-Max:

    0.000001 A

  • Input Characteristics:

    SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-232-F; TIA-232-F; V.28

  • JESD-30 Code:

    R-PDSO-G20

  • JESD-609 Code:

    e4

  • Length:

    6.5 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    20

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    10 V

  • Output Low Current-Max:

    0.0016 A

  • Output Polarity:

    INVERTED

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP20,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receiver Number of Bits:

    2

  • Seated Height-Max:

    1.2 mm

  • Supply Current-Max:

    1 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4.4 mm

TRS3222EIPWR Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital traces separate. Also, it's recommended to use a 10uF capacitor between VCC and GND, and to keep the input and output traces as short as possible.
  • The TRS3222EIPWR requires a single 3.3V power supply, and it's recommended to use a low-dropout linear regulator (LDO) to power the device. Also, make sure to decouple the power pins with a 10uF capacitor.
  • The TRS3222EIPWR can support data rates up to 100 Mbps, but the actual data rate may vary depending on the specific application and system design.
  • The TRS3222EIPWR can be configured for half-duplex or full-duplex operation by setting the appropriate pins high or low. For half-duplex operation, pin 14 (RXEN) should be tied high, and for full-duplex operation, pin 14 should be tied low.
  • Texas Instruments recommends using a 1kΩ pull-up resistor on the RX and TX lines, and a 10kΩ pull-down resistor on the RX line. Additionally, a 50Ω termination resistor is recommended on the TX line.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TRS3222EIPWR Overview

Use the download button to access the TRS3222EIPWR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TRS32, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TRS3222EIPWR

Showing 0 results

TRS3222EIPWR Alternates

Showing results

Image Part Number Model
Part Image SN75C3222EPW Texas Instruments

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, BIPolar, PDSO20

Part Image MAX3222IPWG4 Texas Instruments

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, BICMOS, PDSO20

Part Image MAX3222CPWG4 Texas Instruments

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, BICMOS, PDSO20

Part Image SN65C3222PWRE4 Texas Instruments

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, BICMOS, PDSO20

Part Image TRS3222CPW Texas Instruments

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, BICMOS, PDSO20

For a full list of alternate parts for TRS3222EIPWR, check out Findchips.com