A good PCB layout for TVA1308 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a low-ESR capacitor for the output filter capacitor.
The input capacitor should be a low-ESR ceramic capacitor with a value between 1uF to 10uF, while the output capacitor should be a low-ESR capacitor with a value between 10uF to 22uF. The capacitor values and types may vary depending on the specific application and operating conditions.
The TVA1308 can operate over a temperature range of -40°C to +125°C, but the device's performance and reliability may degrade at extreme temperatures. It's recommended to operate the device within a temperature range of -20°C to +85°C for optimal performance.
The TVA1308 requires a bias voltage of 2.5V to 5.5V on the VCC pin, and the EN pin should be tied to a logic high (VCC) to enable the device. Additionally, the input voltage should be within the recommended range of 2.5V to 5.5V for optimal performance.
The typical startup time for TVA1308 is around 1ms, but this can vary depending on the input voltage, output load, and other operating conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
TVA1308 Overview
Use the download button to access the TVA1308 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like TVA13,
or try a keyword search, such as Ceramic Capacitors
