3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for UC2834DW
- Part Number UC2834DW
- Manufacturer Texas Instruments
- Pin Count 16
- Part Category Integrated Circuit
- Last Modified Date May 15, 2023 9:26 AM UTC
- Pinout / Pin List Click Here (Member Only)
UC2834DW Details
-
Manufacturer Part Number:
UC2834DW
-
Brand Name:
Texas Instruments
-
Pbfree Code:
Yes
-
Rohs Code:
Yes
-
Part Life Cycle Code:
Active
-
Part Package Code:
SOIC
-
Pin Count:
16
-
ECCN Code:
EAR99
-
HTS Code:
8542.39.00.90
-
Manufacturer:
Texas Instruments
-
YTEOL:
15
UC2834DW Frequently Asked Questions (FAQs)
-
The UC2834DW is a high-frequency switching regulator, and proper layout and placement are crucial for its operation. TI recommends a 4-layer PCB with a solid ground plane, and the IC should be placed close to the input capacitors. The output inductor and diode should be placed close to the IC, and the output capacitors should be placed close to the load. A good rule of thumb is to keep the high-current paths short and wide, and to minimize the loop area of the switching node.
-
The selection of the inductor depends on the output current, output voltage, and switching frequency. TI recommends using an inductor with a low DC resistance (DCR) and a high saturation current. The inductor value should be chosen to achieve the desired output ripple voltage. A good starting point is to use an inductor with a value between 1-10 uH, and to adjust the value based on the output ripple voltage measurement.
-
The UC2834DW has an absolute maximum input voltage rating of 18V. However, the recommended operating input voltage range is 6-15V. Operating the IC above 15V may reduce its reliability and lifespan.
-
The UC2834DW requires a compensation network to ensure stability. TI recommends using a Type II compensation network, which consists of a resistor, a capacitor, and an optional zero. The compensation values depend on the output voltage, output current, and switching frequency. A good starting point is to use the values recommended in the datasheet, and to adjust them based on the loop gain measurement.
-
The bootstrap capacitor is used to generate the gate drive voltage for the high-side FET. It is charged through the bootstrap diode during the off-time of the high-side FET, and it provides the necessary voltage to turn on the FET during the on-time. The bootstrap capacitor value should be chosen to ensure that the gate drive voltage is sufficient to fully turn on the FET.
Trust Checks
Trust Score Unavailable
UC2834DW Overview
Use the download button to access the UC2834DW 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like UC283,
or try a keyword search, such as Power Management Circuits
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
