The UC382T-ADJ is a high-frequency switching regulator, and as such, it requires careful PCB design and layout to minimize noise and ensure reliable operation. TI recommends using a multi-layer PCB with a solid ground plane, keeping the switching node (pins 3 and 4) as short as possible, and using a Kelvin connection for the output voltage sense pins (pins 1 and 2). Additionally, it's essential to keep the input and output capacitors close to the IC and use a low-ESR capacitor for the output filter.
The UC382T-ADJ requires a compensation network to ensure stability. TI recommends using a Type II compensation network, which consists of a resistor (R3) and two capacitors (C1 and C2) connected between the COMP pin (pin 5) and GND. The values of these components depend on the specific application and can be calculated using TI's compensation calculator or by following the guidelines in the datasheet.
The UC382T-ADJ has an absolute maximum input voltage rating of 30V. However, the recommended maximum input voltage is 28V to ensure reliable operation and to prevent damage to the internal components. It's essential to ensure that the input voltage does not exceed 28V to prevent damage to the IC.
Yes, the UC382T-ADJ can be used in a synchronous buck converter configuration. In this configuration, the IC controls the high-side switch (Q1) and the low-side switch (Q2) to achieve higher efficiency and lower losses. However, it's essential to ensure that the low-side switch is properly synchronized with the high-side switch to prevent shoot-through currents and to ensure reliable operation.
The UC382T-ADJ has built-in overcurrent protection (OCP) and overvoltage protection (OVP) features. The OCP threshold is set by the resistor connected between the ISENSE pin (pin 6) and GND, while the OVP threshold is set by the resistor connected between the VSENSE pin (pin 7) and GND. Additionally, it's recommended to use external protection devices such as fuses, TVS diodes, and Zener diodes to provide additional protection against overcurrent and overvoltage conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
UC382T-ADJ Overview
Use the download button to access the UC382T-ADJ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like UC382,
or try a keyword search, such as Linear Regulator ICs
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
