Part Image

UC3842P - Texas Instruments

Description: Optimized For Off-line and DC-to-DC Converters Low Start-Up Current (<1 mA) Automatic Feed Forward Compensation Pulse-by-Pulse Current Limiting Enhanced Load Response Characteristics Under-Voltage Lockout With Hysteresis Double Pulse Suppression High Current Totem Pole Output Internally Trimmed Bandgap Reference 500-kHz Operation Low Ro Error Amp

Download UC3842P Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
UC3842P - Texas Instruments PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - P (R-PDIP-T8)
click to zoom
3D Models
UC3842P - Texas Instruments  - 3D model - Dual-In-Line Packages - P (R-PDIP-T8)
click to zoom

UC3842P Details

  • Manufacturer Part Number:

    UC3842P

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    DIP

  • Package Description:

    PLASTIC, DIP-8

  • Pin Count:

    8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Analog IC - Other Type:

    SWITCHING CONTROLLER

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    25 V

  • Input Voltage-Min:

    11.5 V

  • Input Voltage-Nom:

    15 V

  • JESD-30 Code:

    R-PDIP-T8

  • Length:

    9.81 mm

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Output Current-Max:

    1 A

  • Output Voltage-Max:

    2.58 V

  • Output Voltage-Min:

    2.42 V

  • Output Voltage-Nom:

    2.5 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP8,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Peak Reflow Temperature (Cel):

    NOT SPECIFIED

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    5.08 mm

  • Supply Current-Max (Isup):

    25 mA

  • Surface Mount:

    NO

  • Switcher Configuration:

    SINGLE

  • Switching Frequency-Max:

    500 kHz

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    NOT SPECIFIED

  • Width:

    7.62 mm

UC3842P Frequently Asked Questions (FAQs)

  • The maximum voltage rating for the UC3842P is 30V, but it's recommended to operate it within 15V to ensure reliable operation and to prevent damage to the internal circuitry.
  • The oscillator circuit resistor values (Rt and Ct) depend on the desired switching frequency. A good starting point is to use the values recommended in the datasheet (Rt = 10kΩ, Ct = 3.3nF for 250kHz). Then, adjust them based on the specific application requirements and the desired frequency.
  • The soft-start pin (SS) is used to gradually increase the output voltage during startup, reducing inrush current and stress on the power components. Connect a capacitor (typically 10nF to 100nF) from the SS pin to ground, and the IC will slowly ramp up the output voltage during startup.
  • To ensure stability, make sure to decouple the power supply pins (VCC and GND) with a 10uF to 100uF capacitor, and use a low-ESR capacitor for the output filter. Also, keep the layout clean and avoid long traces, especially between the output and the feedback pins.
  • The UC3842P is a controller IC, not a power switch, so it doesn't have an output current capability. It's designed to drive an external power switch, such as a MOSFET or IGBT, which determines the maximum output current.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

UC3842P Overview

Use the download button to access the UC3842P schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UC384, or try a keyword search, such as Switching Regulator or Controllers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to UC3842P

Showing 0 results

UC3842P Alternates

Showing results

Image Part Number Model
Part Image UC3842AN2G Rochester Electronics LLC

1A SWITCHING CONTROLLER, 500kHz SWITCHING FREQ-MAX, PDIP8, LEAD FREE, PLASTIC, DIP-8

Part Image IP3842N TT Electronics Resistors

Switching Controller, Current-mode, 1A, 500kHz Switching Freq-Max, PDIP8

Part Image UC3842BVN Motorola Semiconductor Products

Switching Controller, Current-mode, 1A, 500kHz Switching Freq-Max, BIPolar, PDIP8

Part Image UC3842TN STMicroelectronics

Switching Controller, Current-mode, 1A, 500kHz Switching Freq-Max, PDIP8

Part Image UC3842AN STMicroelectronics

Switching Controller, Current-mode, 1A, 500kHz Switching Freq-Max, BIPolar, PDIP8

For a full list of alternate parts for UC3842P, check out Findchips.com