A 2-layer or 4-layer PCB with a thermal relief pattern and a solid ground plane is recommended. Ensure a minimum of 1mm clearance around the device for heat dissipation.
Use a high-quality output capacitor with low ESR (Equivalent Series Resistance) and ensure the input capacitor is rated for the input voltage. Also, ensure the feedback resistors are 1% tolerance or better.
The UDZSTE-1710B is rated for operation up to 85°C ambient temperature. However, for reliable long-term operation, it's recommended to keep the ambient temperature below 70°C.
While the datasheet recommends a specific inductor value and type, you can use a different inductor as long as it meets the required inductance, saturation current, and DCR (DC Resistance) specifications.
Check the PCB layout for noise coupling, ensure the output capacitor is properly sized, and verify the feedback resistors are correctly connected. Also, check for any signs of overheating or excessive current draw.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
UDZSTE-1710B Overview
Use the download button to access the UDZSTE-1710B schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UDZST,
or try a keyword search, such as Zener Diodes