The recommended operating voltage range for UM6K33NTN is 2.2V to 5.5V.
To ensure the stability of the output voltage, it is recommended to use a ceramic capacitor with a capacitance of 1uF or more between the VIN pin and the GND pin, and a ceramic capacitor with a capacitance of 1uF or more between the VOUT pin and the GND pin.
The maximum output current that UM6K33NTN can provide is 300mA.
The output voltage of UM6K33NTN can be adjusted by connecting a resistor divider network between the VOUT pin and the GND pin, and connecting the center tap of the resistor divider network to the FB pin.
The EN (Enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled, and when the EN pin is low, the regulator is disabled.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
UM6K33NTN Overview
Use the download button to access the UM6K33NTN schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UM6K3,
or try a keyword search, such as Small Signal Field-Effect Transistors