Nichicon recommends a PCB layout with a large copper area for the capacitor pads, and a short and wide connection to the capacitor to minimize ESR. A 4-layer PCB with a solid ground plane is also recommended.
The UVP1E220MED is designed to handle high-frequency ripple current, but the impedance may increase at high frequencies. Nichicon recommends using the impedance vs. frequency curve in the datasheet to determine the capacitor's behavior under specific operating conditions.
Nichicon recommends a voltage derating of 10% to 20% to ensure reliable operation and to prevent voltage stress on the capacitor. However, the maximum allowed voltage derating may vary depending on the specific application and operating conditions.
The UVP1E220MED is rated for operation up to 125°C, but Nichicon recommends derating the voltage and current ratings at high temperatures to ensure reliable operation. The capacitor's lifespan may also be affected by high temperatures.
The UVP1E220MED is designed to handle power cycling and on/off switching, but Nichicon recommends following the recommended voltage and current ratings to prevent damage to the capacitor. The capacitor's lifespan may be affected by frequent power cycling and on/off switching.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
UVP1E220MED Overview
Use the download button to access the UVP1E220MED schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UVP1E,
or try a keyword search, such as Aluminum Electrolytic Capacitors