The recommended footprint and land pattern for the V30MLA1210NH can be found in the Littelfuse application note AN9313, which provides guidelines for surface mount assembly of TVS diodes.
To ensure reliability in high-temperature applications, it is recommended to derate the power rating of the V30MLA1210NH according to the temperature derating curve provided in the datasheet. Additionally, ensure that the device is properly soldered and that the PCB is designed to handle the thermal stresses.
While the V30MLA1210NH is primarily designed for surge protection, it can be used in high-frequency applications up to 1 GHz. However, the device's parasitic capacitance and inductance should be considered in the design, and the user should consult the datasheet and application notes for guidance on high-frequency usage.
To select the correct V30MLA1210NH, consider the following factors: the maximum voltage and current ratings required, the desired clamping voltage, and the operating temperature range. Consult the datasheet and Littelfuse's selection guide to determine the most suitable device for your application.
The V30MLA1210NH provides ESD protection up to ±30 kV air discharge and ±30 kV contact discharge, according to the IEC 61000-4-2 standard. This makes it suitable for protecting sensitive electronics from electrostatic discharge events.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
V30MLA1210NH Overview
Use the download button to access the V30MLA1210NH schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like V30ML,
or try a keyword search, such as Non-linear Resistors
