Littelfuse recommends a thermal pad on the bottom of the device, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2 oz copper thickness is recommended.
Littelfuse recommends using a soldering iron with a temperature of 250°C to 260°C, and a soldering time of 2-3 seconds. The device should be soldered to the PCB using a solder with a melting point of 180°C to 190°C.
The V82RA16 can withstand a maximum surge current of 100 A for 10 ms, as per the IEC 61000-4-5 standard.
Yes, the V82RA16 can be used in high-frequency applications up to 100 kHz. However, the device's performance may degrade at higher frequencies due to internal capacitance and inductance.
Littelfuse recommends using a fuse holder or clip that is specifically designed for the V82RA16, such as the Littelfuse FH-016 or FH-016-1. These holders provide a secure connection and ensure proper heat dissipation.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
V82RA16 Overview
Use the download button to access the V82RA16 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like V82RA,
or try a keyword search, such as Non-linear Resistors
