The recommended PCB footprint for VO617A-4X016 is a rectangular pad with a size of 1.6 mm x 0.8 mm, with a 0.3 mm x 0.3 mm thermal pad in the center. The pad should be solder-mask defined with a 0.1 mm gap between the pad and the solder mask.
To ensure reliable soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the PCB pad. Use a reflow oven with a peak temperature of 240°C to 250°C, and a dwell time of 30 seconds to 60 seconds. Avoid using excessive solder paste or flux, as it can cause solder bridging or contamination.
The maximum operating temperature range for VO617A-4X016 is -40°C to 150°C. However, the device is designed to operate optimally between -20°C to 125°C. Operating the device outside the recommended temperature range may affect its performance and reliability.
To handle ESD protection for VO617A-4X016, use an ESD wrist strap or mat when handling the device. Ensure that the PCB and components are properly grounded, and use ESD-sensitive packaging materials during storage and transportation. Avoid touching the device's pins or leads, and use an ESD-protected workstation or area.
The recommended storage condition for VO617A-4X016 is in a dry, cool place with a temperature range of 20°C to 30°C and relative humidity below 60%. Avoid storing the device in direct sunlight, high-temperature environments, or areas with high humidity.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
VO617A-4X016 Overview
Use the download button to access the VO617A-4X016 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like VO617,
or try a keyword search, such as Optocoupler
