Part Image

VRE305AS - Apex Microtechnology

Description: The VRE305 series of low cost, zener-based precision Integrated Circuits provides ultra-stable +5V output with ±0.5mV (.01%) initial accuracy. This improvement in accuracy is made possible by a unique proprietary multipoint laser compensation technique. Significant improvements have been made in other performance parameters, including warm-up drift, line regulation, and long-term stability, to make this series the most accurate and stable references available in an industry standard 8-pin SMT or DIP package

Download VRE305AS Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
VRE305AS - Apex Microtechnology  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

VRE305AS Details

  • Manufacturer Part Number:

    VRE305AS

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Apex Microtechnology Inc

  • YTEOL:

    6.6

  • Analog IC - Other Type:

    THREE TERMINAL VOLTAGE REFERENCE

  • JESD-30 Code:

    R-PDSO-F8

  • JESD-609 Code:

    e3

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Output Voltage-Nom:

    5 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOF

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Qualification Status:

    Not Qualified

  • Supply Voltage-Max (Vsup):

    22 V

  • Supply Voltage-Min (Vsup):

    13.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Temp Coef of Voltage-Max:

    0.6 ppm/°C

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    FLAT

  • Terminal Position:

    DUAL

  • Trim/Adjustable Output:

    YES

VRE305AS Frequently Asked Questions (FAQs)

  • Apex Microtechnology recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A minimum of 1 oz copper thickness is recommended. Additionally, a heat sink or thermal interface material can be used to further improve thermal performance.
  • To ensure reliable operation over the full temperature range, it's essential to follow proper PCB design and layout guidelines, use a suitable thermal management strategy, and ensure that the device is operated within its specified voltage and current ratings. Additionally, consider using a temperature sensor to monitor the device temperature and implement thermal shutdown or derating if necessary.
  • Apex Microtechnology recommends using low-ESR capacitors with a minimum capacitance of 10uF for the input and output. X5R or X7R dielectric capacitors are suitable for this application. The capacitor values may need to be adjusted based on the specific application and operating conditions.
  • To protect the device from overvoltage and overcurrent conditions, consider using a voltage supervisor or overvoltage protection (OVP) circuit, and a current sense resistor or current limiter. Additionally, ensure that the device is operated within its specified voltage and current ratings, and consider using a fuse or PTC resettable fuse for added protection.
  • Apex Microtechnology recommends a slow startup sequence, with a ramp-up time of at least 10ms, to prevent inrush currents and ensure reliable operation. During shutdown, the input voltage should be reduced slowly to prevent voltage spikes and ensure that the device is fully discharged before power-off.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

VRE305AS Overview

Use the download button to access the VRE305AS 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like VRE30, or try a keyword search, such as Voltage References

Parts related to VRE305AS

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview