Renesas provides a recommended PCB layout guide in their application note (APN) documents, which can be found on their website. The guide includes thermal vias, heat sink recommendations, and PCB layer stack-up suggestions to ensure optimal thermal performance.
The XLH336100 has a built-in overcurrent protection feature, but it's not enabled by default. To implement overcurrent protection, you need to set the OCP (OverCurrent Protection) pin high and configure the OCP threshold using the I2C interface. Refer to the datasheet and application notes for detailed instructions.
Although the datasheet specifies a maximum operating voltage of 5.5V, the VCC pin can tolerate up to 6.5V during power-up, but only for a short duration (typically <100ms). Exceeding this voltage or duration may damage the device.
First, verify the I2C bus voltage levels, clock frequency, and signal integrity. Check the device address, clock stretching, and bus arbitration. If issues persist, try resetting the device, checking for bus conflicts, or using an I2C bus analyzer to debug the issue.
Renesas recommends using a TVS (Transient Voltage Suppressor) diode or an ESD protection device with a voltage rating of 5.5V or higher to protect the XLH336100 from electrostatic discharge. The ESD protection device should be placed as close as possible to the XLH336100.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XLH336100.000000I Overview
Use the download button to access the XLH336100.000000I schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XLH33,
or try a keyword search, such as XO
