FM-TX Footprint, Symbol and 3D Model search results

Showing 25 of 731 results

Price & Stock Powered by

Filter by Manufacturer

Image	Part Number	D.S	Description	Package Category	Prices / Stock	Model	Action
	EEUFM1H181LB Panasonic	1	Electrolytic Capacitor, 180 µF, 50 V, FM Series, ± 20%, Radial Leaded, 4000 hours @ 105°C.	Capacitor, Polarized Radial Diameter	EEUFM1H181LB	3D model available Symbol and footprint available 3	1 Download Model
	EEUFM1H220 Panasonic	1	Panasonic Aluminium Electrolytic Capacitor 22μF 50V dc 5mm FM Radial Series, Through Hole Electrolytic, ±20%	Capacitor, Polarized Radial Diameter	EEUFM1H220	3D model available Symbol and footprint available 3	1 Download Model
	EEUFM0J122B Panasonic	1	Electrolytic Capacitor, 1200 µF, 6.3 V, FM Series, ± 20%, Radial Leaded, 4000 hours @ 105°C	Capacitor, Polarized Radial Diameter	EEUFM0J122B	3D model available Symbol and footprint available 3	1 Download Model
	EEU-FM1A471 Panasonic	1	Aluminum Electrolytic Capacitors - Radial Leaded 470UF 10V ELECT FM RADIAL	Capacitor, Polarized Radial Diameter	EEU-FM1A471	3D model available Symbol and footprint available 3	1 Download Model

	EEU-FM1A102L Panasonic	1	Panasonic Aluminium Electrolytic Capacitor 1000μF 10V dc 8mm FM Series, Through Hole Electrolytic, ±20%	Capacitor, Polarized Radial Diameter	EEU-FM1A102L	3D model available Symbol and footprint available 3	1 Download Model
	ATA8743C-PXQW-1 Microchip	1	RF Microcontrollers - MCU Embedded C incl RF Tx for 868 MHz with UHF ASK/FSK Transmitter	Quad Flat No-Lead	ATA8743C-PXQW-1	3D model available Symbol and footprint available 3	1 Download Model
	HFBR-1414MZ Avago Technologies	1	Low Cost Hi Pwr ST Fibre Optic Tx M/ Pt Avago, 160MBd Fibre Optic Transmitter 820nm, Round, 27.2 x 12.7 x 10.2mm, HFBR-1414MZ	Other	HFBR-1414MZ	3D model available Symbol and footprint available 3	1 Download Model
	SI4702-C19-GM Silicon Labs	1	SILICON LABS - SI4702-C19-GM - RF Receiver, MP3 Players, Notebook PCs, FM Radio, 76MHz to 108MHz, FM, 2.7V to 5.5V Supply, QFN-20	Other	SI4702-C19-GM	3D model not available Symbol and footprint available 2	1 Download Model
	EEUFM1H271 Panasonic	1	PANASONIC - EEUFM1H271 - Electrolytic Capacitor, 270 µF, 50 V, FM Series, ± 20%, Radial Leaded, 10 mm	Capacitor, Polarized Radial Diameter	EEUFM1H271	3D model available Symbol and footprint available 3	1 Download Model
	A1101R04C00GM ANAREN	1	Sub-GHz Modules 400MHz Radio Only Connector, Ultra small package size 9mm x 12mm x 2.5mm, 1.8 to 3.6 V operation, Separate 64-byte RX and TX data FIFOs	Other	A1101R04C00GM	3D model available Symbol and footprint available 3	1 Download Model
	EEUFM1V331L Panasonic	1	Al Electrolytic Cap 105C 35V 330uF Panasonic Aluminium Electrolytic Capacitor 330μF 35 V dc 8mm Through Hole series FM Radial lifetime 4000h	Capacitor, Polarized Radial Diameter	EEUFM1V331L	3D model available Symbol and footprint available 3	1 Download Model
	EEU-FM1H102 Panasonic	1	Al Electrolytic Cap 105C 50V 1000uF Panasonic 1000uF 50 V dc Aluminium Electrolytic Capacitor, FM Series 7000h 16 Dia. x 25mm	Capacitor, Polarized Radial Diameter	EEU-FM1H102	3D model available Symbol and footprint available 3	1 Download Model
	EEU-FM1C102 Panasonic	1	Al Electrolytic Cap 105C 16V 1000uF Panasonic 1000uF 16 V dc Aluminium Electrolytic Capacitor, FM Series 5000h 10 Dia. x 20mm	Capacitor, Polarized Radial Diameter	EEU-FM1C102	3D model available Symbol and footprint available 3	1 Download Model
	EEU-FM1E221 Panasonic	1	Al Electrolytic Cap 105C 25V 220uF Panasonic 220μF 25 V dc Aluminium Electrolytic Capacitor, FM Radial Series 3000h 8 Dia. x 11.5mm	Capacitor, Polarized Radial Diameter	EEU-FM1E221	3D model available Symbol and footprint available 3	1 Download Model
	EEU-FM1V331L Panasonic	1	Al Electrolytic Cap 105C 35V 330uF Panasonic Aluminium Electrolytic Capacitor 330μF 35 V dc 8mm Through Hole series FM Radial lifetime 4000h	Capacitor, Polarized Radial Diameter	EEU-FM1V331L	3D model available Symbol and footprint available 3	1 Download Model

	MAX3955ETJ+ Analog Devices	1	PerformanceDual CDRs Exceeding SONET Jitter Requirements with PLL Bandwidth Setting of 7MHz540mW Typical IC Power Dissipation (ILD_MOD = 45mA, IBIAS = 45mA, Both CDRs Enabled)FlexibilityIndependent, Reference-less Tx and Rx CDRsPattern Generator for Receive and Transmit PathsSignal Loop-Back PathsProgrammable Tx Input Equalization and Rx Output DeemphasisPin-Compatible with MAX3956 11.3Gbps TransceiverSafety and MonitoringIntegrated Eye Safety Features with Maskable Fault and Interrupt Signal GenerationAnal	Quad Flat No-Lead	MAX3955ETJ+	3D model available Symbol and footprint available 3	1 Download Model
	F1456NKGK8 Renesas Electronics	1	The F1456 is a High-Gain/High-Linearity 2100MHz to 2950MHz TX Variable Gain Amplifier used in transmitter applications. The F1456 TX VGA provides 32.1dB maximum gain with +38dBm OIP3 and 3.9dB noise figure. Up to 31.5dB gain control is achieved using the combination of a digital step attenuator (DSA) plus KLIN™ RF variable gain amplifier gain adjustment. This device uses a single 5V supply and 215mA of ICC. This device is packaged in a 6 × 6 mm, 28-QFN with 50Ω single-ended RF input and RF output impedances	Quad Flat No-Lead	F1456NKGK8	3D model available Symbol and footprint available 3	1 Download Model
	EFR32MG27C140F768IM32-BR Silicon Labs	1	• Low Power Wireless System-on-Chip\r\n• High Performance 32-bit 76.8 MHz MHz ARM Cortex®-M33\r\nwith DSP instruction and floating-point unit for efficient signal processing\r\n• 768 kB flash program memory\r\n• 64 kB RAM data memory\r\n• 2.4 GHz radio operation\r\n• Radio Performance\r\n• -102.2 dBm sensitivity @ 250 kbps O-QPSK DSSS\r\n• -106.9 dBm sensitivity @ 125 kbps GFSK\r\n• -99.2 dBm sensitivity @ 1 Mbit/s GFSK\r\n• -96.3 dBm sensitivity @ 2 Mbit/s GFSK\r\n• TX power up to 8 dBm\r\n• Low System Energy Consumption\r\n• 4.0 m	Quad Flat No-Lead	EFR32MG27C140F768IM32-BR	3D model available Symbol and footprint available 3	1 Download Model
	ISL32614EFHZ-T Renesas Electronics	1	The ISL32613E and ISL32614E are ±16. 5kV HBM ESD protected (7kV IEC61000 contact), 1. 8V powered, single transmitters for differential communication. These drivers have very low bus currents (±40µA), so they present less than a 1/8 unit load to the bus. The low bus currents allow more than 256 transmitters on the network without violating the RS-485 specification’s 32 unit load maximum and without using repeaters. Hot plug circuitry ensures that the Tx outputs remain in a high impedance state while the powe	SOT23 (6-Pin)	ISL32614EFHZ-T	3D model available Symbol and footprint available 3	1 Download Model
	ISL4489EIBZ-T Renesas Electronics	1	The ISL4489E and ISL4491E are ESD protected, “fractional”Unit Load (UL), BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes without latch-up. Unlike competitive versions, these devices are specified for 10% tolerance supplies (4. 5V to 5. 5V). The Rx inputs and Tx outputs present a 1/8 unit load to the RS-485 bus, which allows a total of 256 transmitters and receivers	Small Outline Packages	ISL4489EIBZ-T	3D model not available Symbol and footprint available 2	1 Download Model
	ISL4491EIBZ-T Renesas Electronics	1	The ISL4489E and ISL4491E are ESD protected, “fractional”Unit Load (UL), BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes without latch-up. Unlike competitive versions, these devices are specified for 10% tolerance supplies (4. 5V to 5. 5V). The Rx inputs and Tx outputs present a 1/8 unit load to the RS-485 bus, which allows a total of 256 transmitters and receivers	Small Outline Packages	ISL4491EIBZ-T	3D model available Symbol and footprint available 3	1 Download Model
	F1320NBGI Renesas Electronics	1	The IDT F1320 is a highly linear complex IF digital pre-distortion (DPD) demodulator with built-in digital step attenuator (DSA) and single-pole-double-throw switches (SP2Ts). It receives the signal coming out of the PA so that the I&Q data at Baseband can be pre-distorted before being sent to the Tx DAC to counteract the distortion inherent in the downstream PA. The signal coupled from the PA is adjusted via a DSA to a lower level and then sub-sampled at an IF frequency of ~200 MHz which necessitates the	Quad Flat No-Lead	F1320NBGI	3D model available Symbol and footprint available 3	1 Download Model
	ISL41334IRZ-T7A Renesas Electronics	1	The ISL81334 and ISL41334 are two-port interface ICs in which each port can be independently configured as a single RS-485, RS-422 transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. With both ports set to the same mode, two RS-485, RS-422 transceivers, or four RS-232 transceivers are available. If either port is in RS-232 mode, the onboard charge pump generates RS-232 compliant ±5V Tx output levels from a single VCC supply as low as 4.5V. Four small 0.1µF capacitors are required for the charge pump.	Quad Flat No-Lead	ISL41334IRZ-T7A	3D model available Symbol and footprint available 3	1 Download Model
	ISL33337EIRZ-T7A Renesas Electronics	1	The ISL33334E, ISL33337E are two port interface ICs where port 1 is configured as a dual (2 Tx, 2 Rx) RS-232 transceiver and port 2 is a single RS-485/RS-422 transceiver. The on-board charge pump generates RS-232 compliant ±5V Tx output levels from a single VCC supply as low as 3. 15V. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V. The port 2 transceiver supports both the RS-485 and RS-422 differential communication standards. The receiver features full fail-safe operation, s	Quad Flat No-Lead	ISL33337EIRZ-T7A	3D model available Symbol and footprint available 3	1 Download Model
	ISL3330IAZ-T7A Renesas Electronics	1	These devices are BiCMOS interface ICs that are user configured as either a single RS-422/RS-485 differential transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 3. 15V. Four small 0. 1µF capacitors are required for the charge pump. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V. In RS-485 mode, the transceivers support both the RS-485 and RS-422 differentia	Small Outline Packages	ISL3330IAZ-T7A	3D model available Symbol and footprint available 3	1 Download Model
7 8 9 10 11 12 13 14 15

Can't find what you're looking for? Request this part

FM-TX Model Download Search Results

Popular Aluminum Electrolytic Capacitors