The recommended PCB footprint for the CMF651M0000BHEA is a rectangular pad with dimensions of 5.08 mm x 3.81 mm, with a thermal pad of 2.54 mm x 2.54 mm in the center. The pad should have a solder mask defined (SMD) and a non-solder mask defined (NSMD) area around the thermal pad.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 221°C. Apply a small amount of solder paste to the PCB pads, and use a reflow oven or a hot air gun to solder the component. Avoid using excessive solder or flux, as it can cause bridging or contamination.
The maximum operating temperature range for the CMF651M0000BHEA is -55°C to 150°C. However, the device's performance and reliability may degrade if operated at temperatures above 125°C for extended periods.
Yes, the CMF651M0000BHEA is designed to withstand vibrations up to 10 G peak acceleration, 10 Hz to 2 kHz frequency range, and 1 hour duration per axis (x, y, z). However, it's essential to ensure proper PCB design, component mounting, and soldering to prevent mechanical stress and damage.
The CMF651M0000BHEA has an internal ESD protection diode, but it's still recommended to follow proper ESD handling procedures during assembly and testing. Use an ESD wrist strap or mat, and ensure that the PCB and components are properly grounded to prevent static electricity damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CMF651M0000BHEA Overview
Use the download button to access the CMF651M0000BHEA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CMF65,
or try a keyword search, such as Fixed Resistors
