The recommended PCB footprint for the IHLP2525CZER6R8M1A is a rectangular pad with a length of 2.5 mm, a width of 2.5 mm, and a thickness of 0.5 mm. The pad should have a non-solder-mask-defined (NSMD) shape to ensure proper soldering.
The IHLP2525CZER6R8M1A has a maximum operating temperature of 125°C. To ensure reliable operation, keep the inductor away from heat sources, use a sufficient thermal pad, and ensure good airflow around the component.
The IHLP2525CZER6R8M1A has a saturation current rating of 6.8 A. Exceeding this rating may cause the inductor to saturate, leading to reduced inductance and potential damage.
Yes, the IHLP2525CZER6R8M1A is suitable for high-frequency applications up to 1 MHz. However, be aware that the inductor's impedance and inductance may vary with frequency, affecting the overall circuit performance.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the PCB pad. Use a soldering technique that minimizes the risk of overheating the component.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IHLP2525CZER6R8M1A Overview
Use the download button to access the IHLP2525CZER6R8M1A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IHLP2,
or try a keyword search, such as Fixed Inductors
