Description:The ISL6251, ISL6251A is a highly integrated battery charger controller for Li-Ion/Li-Ion polymer batteries and NiMH batteries. High efficiency is achieved by a synchronous buck topology and the use of a MOSFET, instead of a diode, for selecting power from the adapter or battery. The low side MOSFET emulates a diode at light loads to improve the light load efficiency and prevent system bus boosting. The constant output voltage can be selected for 2, 3 and 4 series Li-Ion cells with 0. 5% accuracy over-tempe
The recommended layout and placement for the ISL6251AHAZ-T involves placing the IC close to the battery, using a solid ground plane, and keeping the high-current paths short and wide. Additionally, it's recommended to place the input capacitors close to the IC and use a common ground point for the input and output capacitors.
To optimize the compensation network for the ISL6251AHAZ-T, you can use the following steps: 1) Choose the right compensation capacitor value based on the output capacitor value and ESR, 2) Adjust the compensation resistor value to achieve a stable loop gain, and 3) Verify the stability of the converter using a Bode plot or a transient response analysis.
The ISL6251AHAZ-T has a thermal shutdown feature that turns off the device when the junction temperature exceeds 150°C. To ensure reliable operation, it's essential to provide adequate heat sinking, use a thermal interface material, and keep the device away from heat sources. Additionally, the PCB layout should be designed to minimize thermal resistance and ensure good airflow.
To troubleshoot issues with the ISL6251AHAZ-T, start by checking the input and output voltage levels, ensuring that they are within the specified range. Next, verify that the compensation network is properly designed and implemented. Check for any signs of overheating, and ensure that the device is properly soldered and connected. If the issue persists, use an oscilloscope to analyze the waveforms and identify the root cause of the problem.
To minimize EMI with the ISL6251AHAZ-T, use a shielded inductor, keep the high-current paths short and away from sensitive circuits, and use a common mode choke or ferrite bead to filter the output. Additionally, ensure that the PCB layout is designed to minimize radiation and that the device is placed in a shielded enclosure if necessary.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL6251AHAZ-T Overview
Use the download button to access the ISL6251AHAZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL62,
or try a keyword search, such as Power Management Circuits
