Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX1486EUB+T - Analog Devices

Description: RS-422/RS-485 Interface IC Software-Selectable, Half-/Full-Duplex, Slew-Rate-Limited, 12Mbps, RS-485/RS-422 Transceivers in MAX

Download MAX1486EUB+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX1486EUB+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX1486EUB+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - U10+2-3
click to zoom
3D Models
MAX1486EUB+T - Analog Devices - 3D model - Small Outline Packages - U10+2-3
click to zoom

MAX1486EUB+T Details

  • Manufacturer Part Number:

    MAX1486EUB+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    10-MINI_SO-N/A

  • Package Description:

    UMAX-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    10-MINI_SO-N/A

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1997-10-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    S-PDSO-G10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    2 V

  • Output Low Current-Max:

    0.004 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP10,.19,20

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    150 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    0.6 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    60 ns

  • Width:

    3 mm

MAX1486EUB+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX1486EUB+T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the power supply and another for the ground plane.
  • To ensure proper power-up and initialization, make sure to follow the recommended power-up sequence, which is to apply the power supply voltage (VCC) before the logic input voltage (VIN). Also, ensure that the input voltage (VIN) is stable and within the recommended range before applying the power supply voltage (VCC).
  • The maximum allowable capacitance on the output pins of the MAX1486EUB+T is 100pF. Exceeding this value may affect the device's performance and stability.
  • Yes, the MAX1486EUB+T can be used in a hot-swap application. However, it's essential to ensure that the device is properly powered down before the hot-swap event and that the input voltage (VIN) is stable and within the recommended range before re-applying power.
  • To troubleshoot issues with the MAX1486EUB+T, start by verifying the power supply voltage (VCC) and input voltage (VIN) are within the recommended ranges. Check the PCB layout for any potential issues, such as noise or signal integrity problems. Use an oscilloscope to monitor the output signals and verify they are within the expected range. If the issue persists, consult the datasheet and application notes for further guidance or contact Analog Devices Inc. support.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX1486EUB+T Overview

Use the download button to access the MAX1486EUB+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX14, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX1486EUB+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX1486EUB+T Alternates

Showing results

Image Part Number Model
Part Image MAX1486CUB Rochester Electronics LLC

LINE TRANSCEIVER, PDSO10, MICRO MAX-10
Part Image MAX1486CUB+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
Part Image MAX1486EUB+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
Part Image MAX1486EUB-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
Part Image MAX1484EUB-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO10
For a full list of alternate parts for MAX1486EUB+T, check out Findchips.com