Part Image

MAX14912AKN+ - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX14912AKN+ - Power Load Switch, High Side, 8 Outputs, 36 V, 870 mA/0.11 ohm out, QFN-56

Download MAX14912AKN+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX14912AKN+ - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - K5688+1
click to zoom
3D Models
MAX14912AKN+ - Analog Devices  - 3D model - Quad Flat No-Lead - K5688+1
click to zoom

MAX14912AKN+ Details

  • Manufacturer Part Number:

    MAX14912AKN+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    56-LFCSP-8X8X0.85

  • Package Description:

    QFN-56

  • Pin Count:

    56

  • Manufacturer Package Code:

    56-LFCSP-8X8X0.85

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2016-09-27

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Built-in Protections:

    OVER CURRENT; THERMAL; TRANSIENT

  • Driver Number of Bits:

    8

  • Interface IC Type:

    BUFFER OR INVERTER BASED PERIPHERAL DRIVER

  • JESD-30 Code:

    S-PQCC-N56

  • JESD-609 Code:

    e3

  • Length:

    8 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    56

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Characteristics:

    TOTEM-POLE

  • Output Current Flow Direction:

    SOURCE AND SINK

  • Output Peak Current Limit-Nom:

    0.87 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC56,.31SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    0.9 mm

  • Supply Current-Max:

    25 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    1.6 V

  • Supply Voltage1-Max:

    36 V

  • Supply Voltage1-Min:

    10 V

  • Supply Voltage1-Nom:

    24 V

  • Surface Mount:

    YES

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Turn-off Time:

    0.7 µs

  • Turn-on Time:

    0.7 µs

  • Width:

    8 mm

MAX14912AKN+ Frequently Asked Questions (FAQs)

  • The recommended layout and routing for the MAX14912AKN+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure the MAX14912AKN+ is properly powered and decoupled, use a high-quality power supply with low noise and ripple, and decouple the device with a 10uF ceramic capacitor and a 100nF ceramic capacitor in parallel, placed as close as possible to the device's power pins.
  • The maximum operating temperature range for the MAX14912AKN+ is -40°C to +125°C, but it's recommended to operate the device within the -20°C to +85°C range for optimal performance and reliability.
  • The MAX14912AKN+ can be programmed using the MAXQ611 or MAXQ612 programming tools, or through the I2C interface using a microcontroller or a dedicated programming device. The device's configuration can be customized using the provided software tools or by writing custom code.
  • The typical current consumption of the MAX14912AKN+ is around 1.5mA, but it can vary depending on the operating frequency, output load, and other factors. It's recommended to consult the datasheet and application notes for more detailed information on power consumption.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX14912AKN+ Overview

Use the download button to access the MAX14912AKN+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX14, or try a keyword search, such as Peripheral Drivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX14912AKN+

Showing 0 results

MAX14912AKN+ Alternates

Showing results

Image Part Number Model
Part Image VN5T006ASPTR-E STMicroelectronics

Buffer/Inverter Based Peripheral Driver, 115A, PDSO10

Part Image MAX14912AKN+ Maxim Integrated Products

Buffer/Inverter Based Peripheral Driver, 8 Driver, 0.87A, BICMOS, QCC56

Part Image MAX14912AKN+T Analog Devices Inc

Buffer/Inverter Based Peripheral Driver, 8 Driver, 0.87A, PQCC56

Part Image MAX14912AKN+T Maxim Integrated Products

Buffer/Inverter Based Peripheral Driver, 8 Driver, 0.87A, BICMOS, QCC56

Part Image VN5T006ASP-E STMicroelectronics

Buffer/Inverter Based Peripheral Driver, 1 Driver, 115A, PDSO10

For a full list of alternate parts for MAX14912AKN+, check out Findchips.com