Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3483CSA+T - Analog Devices

Description: 3.3V Powered, 10Mbps and Slew-Rate Limited, True RS-485/RS-422 Transceivers

Download MAX3483CSA+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3483CSA+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3483CSA+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO
click to zoom
3D Models
MAX3483CSA+T - Analog Devices - 3D model - Small Outline Packages - 8 SO
click to zoom

MAX3483CSA+T Details

  • Manufacturer Part Number:

    MAX3483CSA+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SOP, SOP8,.25

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1994-12-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.0025 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    120 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    2.2 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1400 ns

  • Width:

    3.9 mm

MAX3483CSA+T Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX3483CSA+T is to keep the signal traces short and away from the power traces, use a solid ground plane, and place the device close to the connector. Additionally, use a common-mode choke or ferrite bead to filter out high-frequency noise.
  • To ensure reliable operation of the MAX3483CSA+T in high-temperature environments, make sure to follow the recommended operating temperature range of -40°C to +85°C, use a heat sink if necessary, and ensure good airflow around the device. Also, consider using a thermal pad or thermal interface material to improve heat dissipation.
  • The maximum cable length supported by the MAX3483CSA+T depends on the specific application and the type of cable used. However, as a general rule, the device can support cable lengths up to 100 meters at data rates up to 100 Mbps. For longer cable lengths or higher data rates, consider using a repeater or a signal conditioner.
  • To troubleshoot common issues with the MAX3483CSA+T, start by checking the power supply voltage and ensuring that it is within the recommended range. Then, verify that the device is properly configured and that the signal lines are properly terminated. Use an oscilloscope to check the signal levels and waveforms, and consult the datasheet and application notes for troubleshooting guides and tips.
  • Yes, the MAX3483CSA+T can be used in a redundant or fault-tolerant system. The device has built-in fault detection and reporting capabilities, and it can be configured to operate in a redundant mode. Consult the datasheet and application notes for more information on how to implement redundancy and fault tolerance with the MAX3483CSA+T.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3483CSA+T Overview

Use the download button to access the MAX3483CSA+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX34, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3483CSA+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3483CSA+T Alternates

Showing results

Image Part Number Model
Part Image ADM3483ARZ-REEL7 Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX3483ESA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image ADM3483AR Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
Part Image SP3483CN/TR Sipex Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image SP3483EN Sipex Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
For a full list of alternate parts for MAX3483CSA+T, check out Findchips.com