Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3483EESA+ - Analog Devices

Description: 3.3V Powered, ±15kV ESD-Protected, 12Mbps, Slew-Rate-Limited True RS-485/RS-422 Transceivers

Download MAX3483EESA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3483EESA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3483EESA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO
click to zoom
3D Models
MAX3483EESA+ - Analog Devices - 3D model - Small Outline Packages - 8 SO
click to zoom

MAX3483EESA+ Details

  • Manufacturer Part Number:

    MAX3483EESA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SO-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-04-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Low Current-Max:

    0.0025 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    120 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    2.2 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1500 ns

  • Width:

    3.9 mm

MAX3483EESA+ Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX3483EESA+ involves keeping the transmitter and receiver sections separate, using a solid ground plane, and minimizing the length of the transmission lines. It's also recommended to use a common-mode filter and to keep the decoupling capacitors close to the device.
  • Proper termination of the MAX3483EESA+ involves connecting a 120Ω resistor between the RX+ and RX- pins, and a 120Ω resistor between the TX+ and TX- pins. Additionally, a 1kΩ pull-up resistor should be connected between the EN pin and the VCC pin to enable the device.
  • The maximum cable length that can be used with the MAX3483EESA+ depends on the data rate and the type of cable used. As a general rule, the maximum cable length is limited to 100m at 100Mbps, 50m at 500Mbps, and 20m at 1Gbps.
  • To troubleshoot issues with the MAX3483EESA+, start by checking the power supply and ensuring that the device is properly enabled. Then, use an oscilloscope to check the signal levels and waveforms at the transmitter and receiver pins. Check for any signs of signal distortion, attenuation, or noise, and verify that the cable is properly terminated and connected.
  • Yes, the MAX3483EESA+ can be used in a half-duplex configuration by connecting the TX+ and RX+ pins together, and the TX- and RX- pins together. However, this configuration is not recommended as it can lead to signal reflections and errors.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3483EESA+ Overview

Use the download button to access the MAX3483EESA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX34, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for MAX3483EESA+, you might also be interested in these parts:
Part Number
MAX3485ESA+T
MLEAMB-A1-0000-000X01
HSMM-C190
APD3224QBC/D-F01
0ZCJ0035AF2E
DSPIC33CK64MP105-I/PT
APHB1608ZGKSURKC
TC234L32F200NACKXUMA1
TC234LP32F200NACKXUMA1

Parts related to MAX3483EESA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3483EESA+ Alternates

Showing results

Image Part Number Model
Part Image ADM3483ARZ-REEL7 Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX3483ESA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image ADM3483AR Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
Part Image SP3483CN/TR Sipex Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image SP3483EN Sipex Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
For a full list of alternate parts for MAX3483EESA+, check out Findchips.com