Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX483EPA+ - Analog Devices

Description: MAX483EPA+, Line Transceiver, RS-485, RS-422 Differential, 4.75 → 5.25 V, 8-Pin PDIP

Download MAX483EPA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX483EPA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX483EPA+ - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - MAX483EPA+
click to zoom
3D Models
MAX483EPA+ - Analog Devices - 3D model - Dual-In-Line Packages - MAX483EPA+
click to zoom

MAX483EPA+ Details

  • Manufacturer Part Number:

    MAX483EPA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-PDIP-300_MIL

  • Package Description:

    PLASTIC, DIP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-PDIP-300_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2000-01-13

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDIP-T8

  • JESD-609 Code:

    e3

  • Length:

    9.375 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP8,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    2000 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    4.572 mm

  • Supply Current-Max:

    0.65 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    NO

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    2000 ns

  • Width:

    7.62 mm

MAX483EPA+ Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX483EPA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the power supply. Additionally, it's recommended to use a shielded cable for the RS-485 bus and to keep the cable away from noise sources.
  • To ensure reliable communication in a noisy industrial environment, use a shielded cable, twisted pair wiring, and implement error detection and correction mechanisms such as checksums or CRCs. Additionally, consider using a common-mode choke or ferrite beads to filter out high-frequency noise.
  • The maximum cable length supported by the MAX483EPA+ depends on the data rate, cable characteristics, and noise environment. As a general guideline, the MAX483EPA+ can support cable lengths up to 4000 feet (1219 meters) at a data rate of 10 Mbps. However, it's recommended to consult the datasheet and perform simulations or testing to determine the maximum cable length for a specific application.
  • The MAX483EPA+ can be configured for half-duplex or full-duplex operation by controlling the DE (driver enable) and RE (receiver enable) pins. For half-duplex operation, tie the DE pin to the RE pin, and for full-duplex operation, tie the DE pin to VCC and the RE pin to GND. Consult the datasheet for more information on the specific pin configurations.
  • The typical power consumption of the MAX483EPA+ depends on the operating mode, data rate, and supply voltage. According to the datasheet, the typical power consumption is around 15mA at 5V supply voltage and 10Mbps data rate. However, it's recommended to consult the datasheet and perform power consumption calculations based on the specific application requirements.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX483EPA+ Overview

Use the download button to access the MAX483EPA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX48, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX483EPA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX483EPA+ Alternates

Showing results

Image Part Number Model
Part Image SN65LBC176P Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDIP8
Part Image MAX483EPA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8
Part Image SN65LBC176PE4 Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDIP8