Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX9259GCB/V+ - Analog Devices

Description: Gigabit Multimedia Serial Link with Spread Spectrum and Full-Duplex Control Channel

Download MAX9259GCB/V+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX9259GCB/V+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX9259GCB/V+ - Analog Devices PCB footprint - Quad Flat Packages - Quad Flat Packages - C64E+10
click to zoom
3D Models
MAX9259GCB/V+ - Analog Devices - 3D model - Quad Flat Packages - C64E+10
click to zoom

MAX9259GCB/V+ Details

  • Manufacturer Part Number:

    MAX9259GCB/V+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    End Of Life

  • Part Package Code:

    64-TQFP_EP-10X10X1.0

  • Package Description:

    10 X 10 MM, 1 MM HEIGHT, ROHS COMPLIANT, TQFP-64

  • Pin Count:

    64

  • Manufacturer Package Code:

    64-TQFP_EP-10X10X1.0

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2009-11-04

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    1

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    LINE RECEIVER

  • Interface Standard:

    ISO 10605

  • JESD-30 Code:

    S-PQFP-G64

  • JESD-609 Code:

    e3

  • Length:

    10 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HTFQFP

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.2 mm

  • Supply Voltage-Max:

    1.9 V

  • Supply Voltage-Min:

    1.7 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    10 mm

MAX9259GCB/V+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX9259GCB/V+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the connector to minimize signal traces. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • The MAX9259GCB/V+ requires differential pair termination to ensure signal integrity. A 100Ω differential termination resistor should be placed at the receiver end, close to the device. The termination resistor should be placed in series with a 0.01μF capacitor to filter out high-frequency noise.
  • The maximum cable length supported by the MAX9259GCB/V+ depends on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 10 meters at data rates up to 12.5 Gbps. For longer cable lengths, repeaters or active cables may be required.
  • The MAX9259GCB/V+ can be configured for different data rates using the RATE pin. The RATE pin can be tied to VCC or GND to select between different data rates. For example, tying the RATE pin to VCC sets the device to 12.5 Gbps mode, while tying it to GND sets the device to 3.125 Gbps mode.
  • The power consumption of the MAX9259GCB/V+ depends on the specific application and the data rate. However, the typical power consumption is around 350mW at 12.5 Gbps and 150mW at 3.125 Gbps. The device also has a low-power mode that can reduce power consumption to around 10mW.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX9259GCB/V+ Overview

Use the download button to access the MAX9259GCB/V+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX92, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX9259GCB/V+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX9259GCB/V+ Alternates

Showing results

Image Part Number Model
Part Image MAX9259GCB/V+ Maxim Integrated Products

Line Receiver, 1 Func, 1 Rcvr, CMOS, PQFP64
Part Image MAX9259GCB/V+GB Maxim Integrated Products

Line Driver
Part Image MAX9259GCB/V+GB Analog Devices Inc

1 Func, 1 Driver, CMOS, PQFP64
Part Image MAX9259GCB/V+WGG4 Analog Devices Inc

1 Func, 1 Driver, CMOS, PQFP64
Part Image MAX9259GCB/V+TWGG4 Analog Devices Inc

1 Func, 1 Driver, CMOS, PQFP64
For a full list of alternate parts for MAX9259GCB/V+, check out Findchips.com