Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX9713ETJ+ - Analog Devices

Description: Audio Amplifiers 6W, Filterless, Spread-Spectrum Mono/Stereo Class D Amplifiers

Download MAX9713ETJ+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX9713ETJ+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX9713ETJ+ - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - T3255+4C_2020
click to zoom
3D Models
MAX9713ETJ+ - Analog Devices - 3D model - Quad Flat No-Lead - T3255+4C_2020
click to zoom

MAX9713ETJ+ Details

  • Manufacturer Part Number:

    MAX9713ETJ+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    32-LFCSP-5X5X0.75

  • Pin Count:

    32

  • Manufacturer Package Code:

    32-LFCSP-5X5X0.75

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Date Of Intro:

    2003-11-28

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Bandwidth-Nom:

    22 kHz

  • Consumer IC Type:

    CLASS D AUDIO AMPLIFIER

  • Gain:

    22.1 dB

  • JESD-30 Code:

    S-XQCC-N32

  • JESD-609 Code:

    e3

  • Length:

    5 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    32

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Power-Nom:

    8 W

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC32,.2SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max:

    17.5 mA

  • Supply Voltage-Max (Vsup):

    25 V

  • Supply Voltage-Min (Vsup):

    10 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    5 mm

MAX9713ETJ+ Frequently Asked Questions (FAQs)

  • The recommended layout and placement for the MAX9713ETJ+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the audio codec or processor. Additionally, it's recommended to use a 4-layer PCB with a dedicated analog layer to minimize noise and interference.
  • To optimize the performance of the MAX9713ETJ+ in a noisy environment, use a low-ESR capacitor for the VDD pin, add a 10uF capacitor between the VDD and GND pins, and use a ferrite bead or a common-mode choke to filter out high-frequency noise. Additionally, consider using a shielded cable for the audio signal and keeping the device away from high-current switching devices.
  • The maximum power dissipation of the MAX9713ETJ+ is 500mW. However, this can be affected by the operating conditions, such as the supply voltage, output load, and ambient temperature. It's recommended to calculate the power dissipation based on the specific application and ensure that the device is operated within the recommended operating conditions.
  • While the MAX9713ETJ+ is specified to operate from 1.8V to 3.6V, it's possible to use it with a different supply voltage. However, this may affect the device's performance, such as the output voltage swing, noise floor, and power consumption. It's recommended to consult with Analog Devices Inc or perform thorough testing to ensure the device meets the required specifications.
  • To troubleshoot issues with the MAX9713ETJ+, start by checking the power supply voltage, output load, and PCB layout. Use an oscilloscope to measure the audio signal and look for signs of noise, distortion, or oscillation. Check the device's pin connections, decoupling capacitors, and ground connections. If the issue persists, consult the datasheet, application notes, or contact Analog Devices Inc for further assistance.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX9713ETJ+ Overview

Use the download button to access the MAX9713ETJ+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX97, or try a keyword search, such as Audio/Video Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX9713ETJ+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX9713ETJ+ Alternates

Showing results

Image Part Number Model
Part Image MAX9713ETJ+T Maxim Integrated Products

CLASS D AUDIO AMPLIFIER, 8W, 1 Channel(s), 1 Func, BICMOS, QCC32
Part Image MAX9713ETJ+ Maxim Integrated Products

CLASS D AUDIO AMPLIFIER, 8W, 1 Channel(s), 1 Func, BICMOS, QCC32
Part Image MAX9713ETJ Maxim Integrated Products

8W, 1 Channel(s), 1 Func, BICMOS, PQCC32
Part Image MAX9713ETJ-T Maxim Integrated Products

Audio Amplifier, 8W, 1 Channel(s), 1 Func, BICMOS, PQCC32, 5 X 5 MM, 0.80 MM HEIGHT, MO-220WHHD-2, TQFN-32