Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX9722AETE+T - Analog Devices

Description: AUDIO AMP, CLASS AB, 130MW, TQFN-16; Amplifier Class:AB; No. of Channels:1 Channel; Output Power:130mW; Supply Voltage Range:2.4V to 5.5V; Amplifier Case Style:TQFN; No. of Pins:16Pins; Load Impedance:32ohm; Product Range:- RoHS Compliant: Yes

Download MAX9722AETE+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX9722AETE+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX9722AETE+T - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 16 TQFN-EP=
click to zoom
3D Models
MAX9722AETE+T - Analog Devices - 3D model - Quad Flat No-Lead - 16 TQFN-EP=
click to zoom

MAX9722AETE+T Details

  • Manufacturer Part Number:

    MAX9722AETE+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-LFCSP-3X3X0.75

  • Package Description:

    HVQCCN, LCC16,.12SQ,20

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-LFCSP-3X3X0.75

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Date Of Intro:

    2003-11-25

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Bandwidth-Nom:

    22 kHz

  • Consumer IC Type:

    AUDIO AMPLIFIER

  • JESD-30 Code:

    S-XQCC-N16

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Power-Nom:

    0.13 W

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC16,.12SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max:

    13 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    2.4 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

MAX9722AETE+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX9722AETE+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the audio input and output connectors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and to keep the power supply lines away from the analog signal lines.
  • To optimize the MAX9722AETE+T for low power consumption, use the lowest possible supply voltage (1.8V), reduce the clock frequency, and use the power-down mode when not in use. Additionally, consider using a lower power mode for the device, such as the 'Low-Power' mode, which reduces the current consumption to around 10mA.
  • The maximum input voltage that the MAX9722AETE+T can handle is 3.3V. Exceeding this voltage may cause damage to the device or affect its performance. It's recommended to use input voltage limiting resistors or voltage dividers to ensure that the input voltage does not exceed 3.3V.
  • To troubleshoot common issues with the MAX9722AETE+T, start by checking the power supply voltage and ensuring that it's within the recommended range. Next, verify that the input signals are within the recommended voltage range and that the input impedance is matched. Check for any noise or interference on the power supply lines and ensure that the device is properly grounded. If the issue persists, try reducing the clock frequency or using a different clock source.
  • The MAX9722AETE+T is designed to operate at a maximum sampling rate of 96kHz. While it's possible to use the device at higher sampling rates, it's not recommended as it may affect the device's performance and accuracy. If a higher sampling rate is required, consider using a different device that's specifically designed for higher sampling rates.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX9722AETE+T Overview

Use the download button to access the MAX9722AETE+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX97, or try a keyword search, such as Audio/Video Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX9722AETE+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX9722AETE+T Alternates

Showing results

Image Part Number Model
Part Image MAX9722AETE+ Analog Devices Inc

Audio Amplifier, 0.13W, 2 Channel(s), 1 Func, BICMOS
Part Image MAX9722AETE+T Maxim Integrated Products

Audio Amplifier, 0.13W, 2 Channel(s), 1 Func, BICMOS, QCC16
Part Image MAX9722AETE-T Maxim Integrated Products

Audio Amplifier, 0.13W, 2 Channel(s), 1 Func, BICMOS, 3 X 3 MM, 0.80 MM HEIGHT, MO-220-WEED-2, TQFN-16
Part Image MAX9722AETE+C2N Maxim Integrated Products

Audio Amplifier, 0.13W, 2 Channel(s), 1 Func, BICMOS, QCC16
Part Image MAX9722AETE+TG47 Maxim Integrated Products

Audio Amplifier, 0.13W, 2 Channel(s), 1 Func, BICMOS, QCC16
For a full list of alternate parts for MAX9722AETE+T, check out Findchips.com