Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADS1100A6IDBVT - Texas Instruments

Description: Texas Instruments ADS1100A6IDBVT, 16 bit Serial ADC, Differential Input, 6-Pin SOT-23

Download ADS1100A6IDBVT Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADS1100A6IDBVT - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
ADS1100A6IDBVT - Texas Instruments PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - DBV0006A
click to zoom
3D Models
ADS1100A6IDBVT - Texas Instruments - 3D model - SOT23 (6-Pin) - DBV0006A
click to zoom

ADS1100A6IDBVT Details

  • Manufacturer Part Number:

    ADS1100A6IDBVT

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOT-23

  • Package Description:

    LSSOP-6

  • Pin Count:

    6

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.30

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Analog Input Voltage-Max:

    5.5 V

  • Analog Input Voltage-Min:

    -2.5 V

  • Conversion Time-Max:

    5434.78 µs

  • Converter Type:

    ADC, DELTA-SIGMA

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e4

  • Length:

    2.9 mm

  • Linearity Error-Max (EL):

    0.0125%

  • Moisture Sensitivity Level:

    1

  • Number of Analog In Channels:

    1

  • Number of Bits:

    16

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Bit Code:

    2S COMPLEMENT BINARY

  • Output Format:

    SERIAL

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Sample Rate:

    0.000128 MHz

  • Seated Height-Max:

    1.45 mm

  • Supply Current-Max:

    0.15 mA

  • Supply Voltage-Min:

    2.7 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.6 mm

ADS1100A6IDBVT Frequently Asked Questions (FAQs)

  • The ADS1100A6IDBVT is a high-impedance device, so it's essential to keep the analog input traces as short as possible and away from digital signals. Use a solid ground plane and decouple the power supply lines with capacitors. Place the device close to the analog signal source and use a low-pass filter to reduce noise.
  • The ADS1100A6IDBVT has a built-in calibration feature. Use the CAL pin to initiate calibration, and the device will adjust its gain and offset to optimize performance. You can also use external calibration resistors to fine-tune the gain and offset. Refer to the datasheet for specific calibration procedures.
  • The ADS1100A6IDBVT has an input voltage range of ±VREF (typically ±2.5V). To protect the device from overvoltage, use input protection diodes or a voltage limiter circuit to clamp the input voltage to within the specified range.
  • The internal temperature sensor has an accuracy of ±2°C. To ensure accurate temperature measurement, use a thermocouple or thermistor with a high accuracy rating, and calibrate the temperature sensor using the CAL pin. Also, ensure good thermal coupling between the sensor and the device.
  • Power up the device by applying VCC first, followed by the analog input voltage. For power-down, remove VCC last. Use the RESET pin to reset the device. Ensure that the power supply is stable and noise-free to prevent errors during power-up and power-down.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADS1100A6IDBVT Overview

Use the download button to access the ADS1100A6IDBVT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADS11, or try a keyword search, such as Analog to Digital Converters

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to ADS1100A6IDBVT

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ADS1100A6IDBVT Alternates

Showing results

Image Part Number Model
Part Image ADS1100A6IDBVR Texas Instruments

ADC, Delta-Sigma, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO6
Part Image ADS1100A6IDBVRG4 Texas Instruments

ADC, Delta-Sigma, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO6