Part Image

AM26LV31CDRG4 - Texas Instruments

Description: Low-Voltage High-Speed Quadruple Differential Line Driver

Download AM26LV31CDRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AM26LV31CDRG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D (R-PDSO-G16)
click to zoom
3D Models
AM26LV31CDRG4 - Texas Instruments  - 3D model - Small Outline Packages - D (R-PDSO-G16)
click to zoom

AM26LV31CDRG4 Details

  • Manufacturer Part Number:

    AM26LV31CDRG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-16

  • Pin Count:

    16

  • Country Of Origin:

    Mexico

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Additional Feature:

    BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION

  • Differential Output:

    YES

  • Driver Number of Bits:

    4

  • High Level Input Current-Max:

    0.00001 A

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    LINE DRIVER

  • Interface Standard:

    EIA-422-B; TIA-422-B; V.11

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e4

  • Length:

    9.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    0.95 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.00095 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    0.1 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    12 ns

  • Width:

    3.9 mm

AM26LV31CDRG4 Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital traces separate. Additionally, use a common mode choke and ferrite beads to filter out high-frequency noise.
  • Use a 50-ohm termination resistor at the receiver end, and ensure the transmission line is properly matched to the driver output impedance. Also, use a controlled impedance PCB to minimize reflections and signal degradation.
  • The maximum cable length depends on the data rate and cable characteristics. As a general guideline, for data rates up to 100 Mbps, the maximum cable length is around 10 meters. For slower data rates, longer cable lengths may be possible.
  • To handle hot swapping, use a power-on reset circuit to ensure the device is properly initialized when the power is applied. Additionally, use a voltage supervisor to monitor the supply voltage and prevent the device from operating outside its specified voltage range.
  • The recommended power sequencing is to power up the VCC supply before the VEE supply. This ensures that the internal voltage regulators are properly initialized and the device operates correctly.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AM26LV31CDRG4 Overview

Use the download button to access the AM26LV31CDRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AM26L, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to AM26LV31CDRG4

Showing 0 results

AM26LV31CDRG4 Alternates

Showing results

Image Part Number Model
Part Image AM26LV31CDR Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image DS26LV31TM/NOPB National Semiconductor Corporation

Line Driver, 4 Func, 4 Driver, CMOS, PDSO16

Part Image AM26LV31CDG4 Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image AM26LV31IDRE4 Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image AM26LV31IDRG4 Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

For a full list of alternate parts for AM26LV31CDRG4, check out Findchips.com