Part Image

AM26LV31IDG4 - Texas Instruments

Description: Buffers & Line Drivers LoVltg Hi-Sp Quad Diff Line Driver

Download AM26LV31IDG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AM26LV31IDG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D (R-PDSO-G16)
click to zoom
3D Models
AM26LV31IDG4 - Texas Instruments  - 3D model - Small Outline Packages - D (R-PDSO-G16)
click to zoom

AM26LV31IDG4 Details

  • Manufacturer Part Number:

    AM26LV31IDG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-16

  • Pin Count:

    16

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Additional Feature:

    BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION

  • Differential Output:

    YES

  • Driver Number of Bits:

    4

  • High Level Input Current-Max:

    0.00001 A

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    LINE DRIVER

  • Interface Standard:

    EIA-422-B; TIA-422-B; V.11

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e4

  • Length:

    9.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -45 °C

  • Out Swing-Min:

    0.95 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.03 A

  • Output Polarity:

    TRUE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    0.1 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    12 ns

  • Width:

    3.9 mm

AM26LV31IDG4 Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signal traces separate. Additionally, use a common mode choke and ferrite beads to filter out high-frequency noise.
  • Use a 50-ohm termination resistor at the receiver end, and ensure the transmission line is properly matched to the driver output impedance. Also, use a controlled impedance PCB to minimize reflections and signal degradation.
  • The maximum cable length depends on the data rate and cable characteristics. As a general guideline, Texas Instruments recommends a maximum cable length of 10 meters at 100 Mbps and 5 meters at 400 Mbps.
  • Use a hot swap controller or a power switch with a soft-start feature to limit the inrush current during hot swapping. Additionally, ensure the power supply can handle the current surge during hot insertion.
  • Power up the VCC supply before the VCCIO supply, and ensure the VCCIO supply is powered up within 100 ms of the VCC supply. This ensures proper device operation and prevents latch-up.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AM26LV31IDG4 Overview

Use the download button to access the AM26LV31IDG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AM26L, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to AM26LV31IDG4

Showing 0 results

AM26LV31IDG4 Alternates

Showing results

Image Part Number Model
Part Image AM26LV31CDR Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image DS26LV31TM/NOPB National Semiconductor Corporation

Line Driver, 4 Func, 4 Driver, CMOS, PDSO16

Part Image AM26LV31CDG4 Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image AM26LV31IDRE4 Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image AM26LV31IDRG4 Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

For a full list of alternate parts for AM26LV31IDG4, check out Findchips.com