Part Image

AM26LV31INS - Texas Instruments

Description: Low-Voltage High-Speed Quadruple Differential Line Driver

Download AM26LV31INS Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AM26LV31INS - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - NS (R-PDSO-G16)
click to zoom
3D Models
AM26LV31INS - Texas Instruments  - 3D model - Small Outline Packages - NS (R-PDSO-G16)
click to zoom

AM26LV31INS Details

  • Manufacturer Part Number:

    AM26LV31INS

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    PLASTIC, SOP-16

  • Pin Count:

    16

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Additional Feature:

    BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION

  • Differential Output:

    YES

  • Driver Number of Bits:

    4

  • High Level Input Current-Max:

    0.00001 A

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    LINE DRIVER

  • Interface Standard:

    EIA-422-B; TIA-422-B; V.11

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e4

  • Length:

    10.2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -45 °C

  • Out Swing-Min:

    0.95 V

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    2 mm

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    12 ns

  • Width:

    5.3 mm

AM26LV31INS Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the signal traces as short as possible. Additionally, it's recommended to use a common mode choke and a shielded cable to minimize EMI.
  • The AM26LV31INS requires a 1 kΩ to 10 kΩ pull-up resistor on the output stage to ensure proper termination. Additionally, it's recommended to use a 100 nF to 1 μF capacitor in series with the output stage to filter out high-frequency noise.
  • The maximum cable length supported by the AM26LV31INS is approximately 50 feet (15.24 meters) at a data rate of 115.2 kbps. However, this can vary depending on the cable quality, noise environment, and data rate.
  • The shutdown mode of the AM26LV31INS can be controlled by applying a logic low signal to the SHDN pin. When in shutdown mode, the device consumes very low power and the outputs are high-impedance. It's recommended to ensure that the SHDN pin is properly decoupled to prevent unwanted shutdowns.
  • The recommended power-up sequence for the AM26LV31INS is to apply power to the VCC pin first, followed by the input signals. This ensures that the device powers up correctly and prevents any potential latch-up conditions.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AM26LV31INS Overview

Use the download button to access the AM26LV31INS schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AM26L, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to AM26LV31INS

Showing 0 results

AM26LV31INS Alternates

Showing results

Image Part Number Model
Part Image AM26LV31CNSLE Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image AM26LV31CNS Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image AM26LV31INSRG4 Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16

Part Image AM26LV31INSRE4 Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16