Part Image

DS90CR288AMTDX/NOPB - Texas Instruments

Description: +3.3V Rising Edge Data Strobe LVDS 28-Bit Channel Link Receiver - 85 MHz

Download DS90CR288AMTDX/NOPB Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DS90CR288AMTDX/NOPB - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - TSSOP
click to zoom
3D Models
DS90CR288AMTDX/NOPB - Texas Instruments  - 3D model - Small Outline Packages - TSSOP
click to zoom

DS90CR288AMTDX/NOPB Details

  • Manufacturer Part Number:

    DS90CR288AMTDX/NOPB

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSSOP

  • Package Description:

    TSSOP-56

  • Pin Count:

    56

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Differential Output:

    YES

  • Input Characteristics:

    DIFFERENTIAL

  • Interface IC Type:

    LINE RECEIVER

  • Interface Standard:

    EIA-644; TIA-644

  • JESD-30 Code:

    R-PDSO-G56

  • JESD-609 Code:

    e3

  • Length:

    14 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    56

  • Operating Temperature-Max:

    70 °C

  • Operating Temperature-Min:

    -10 °C

  • Out Swing-Min:

    0.25 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.002 A

  • Output Polarity:

    TRUE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP56,.3,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    3.5 ns

  • Receiver Number of Bits:

    4

  • Seated Height-Max:

    1.2 mm

  • Supply Current-Max:

    135 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    6.1 mm

DS90CR288AMTDX/NOPB Frequently Asked Questions (FAQs)

  • Texas Instruments provides a recommended PCB layout in the datasheet, but it's also recommended to follow the guidelines in the 'High-Speed PCB Layout Guidelines' application note (SLVA466) for optimal performance.
  • To ensure signal integrity, use controlled impedance traces, minimize trace lengths, and use termination resistors as recommended in the datasheet. Additionally, use simulation tools like IBIS-AMI models to simulate and optimize signal integrity.
  • The maximum cable length supported by the DS90CR288AMTDX/NOPB depends on the specific application and the type of cable used. As a general guideline, the datasheet recommends a maximum cable length of 10 meters for FPD-Link III applications.
  • To troubleshoot issues with the DS90CR288AMTDX/NOPB, use tools like oscilloscopes and logic analyzers to analyze the signal waveforms and protocol activity. Also, refer to the 'Troubleshooting Guide' section in the datasheet and the 'DS90CR288A Troubleshooting Guide' application note (SLVA744).
  • The power consumption of the DS90CR288AMTDX/NOPB depends on the specific application and operating conditions. The datasheet provides typical power consumption values, but for more accurate estimates, use the 'Power Estimator' tool on the Texas Instruments website.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DS90CR288AMTDX/NOPB Overview

Use the download button to access the DS90CR288AMTDX/NOPB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DS90C, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to DS90CR288AMTDX/NOPB

Showing 0 results

DS90CR288AMTDX/NOPB Alternates

Showing results

Image Part Number Model
Part Image DS90CR288MTDX Rochester Electronics LLC

5 LINE RECEIVER, PDSO56, TSSOP-56

Part Image DS90CR288AMTDX/NOPB National Semiconductor Corporation

Line Receiver, 1 Func, 4 Rcvr, CMOS, PDSO56

Part Image DS90CR288AMTD National Semiconductor Corporation

Line Receiver, 1 Func, 4 Rcvr, CMOS, PDSO56

Part Image DS90CR288AMTD/NOPB National Semiconductor Corporation

Line Receiver, 1 Func, 4 Rcvr, CMOS, PDSO56

Part Image DS90CR288MTD National Semiconductor Corporation

Line Receiver, 5 Func, 5 Rcvr, CMOS, PDSO56

For a full list of alternate parts for DS90CR288AMTDX/NOPB, check out Findchips.com