Description:The Intersil ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E, ISL3285E are ±16. 5kV IEC61000 ESD Protected, 3. 0V to 5. 5V powered, single receivers that meet both the RS-485 and RS-422 standards for balanced communication. These receivers have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 receivers on the network without violating the RS-485 specification’s 32 unit load maximum and without using repeaters. Receiver inputs feature a “
A good PCB layout for the ISL3283EFHZ-T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the signal traces. It's also recommended to place the device close to the signal sources and loads to reduce noise and interference.
To ensure proper power and decoupling, use a high-quality power supply with low noise and ripple. Add decoupling capacitors (e.g., 0.1uF and 10uF) close to the device's power pins, and consider adding a ferrite bead or inductor in series with the power supply to filter out high-frequency noise.
The maximum cable length supported by the ISL3283EFHZ-T depends on the specific application and the type of cable used. As a general guideline, the device can support cable lengths up to 100 meters (330 feet) for RS-232 and 1000 meters (3300 feet) for RS-485, but this may vary depending on the specific implementation and environmental conditions.
To troubleshoot issues with the ISL3283EFHZ-T, start by checking the power supply and decoupling, then verify the signal integrity and cable quality. Use a logic analyzer or oscilloscope to inspect the signal waveforms and identify any anomalies. Consult the datasheet and application notes for specific troubleshooting guidelines and FAQs.
Yes, the ISL3283EFHZ-T has a maximum junction temperature of 150°C. To ensure reliable operation, ensure good airflow around the device, and consider using a heat sink or thermal pad if the device is expected to operate in high-temperature environments or under heavy load conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL3283EFHZ-T Overview
Use the download button to access the ISL3283EFHZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL32,
or try a keyword search, such as Line Driver or Receivers
